Zte BLADE V7 LITE Quick Start Manual page 2

As SAR is measured utilizing the device's highest
Don't dispose of your phone in fire.
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
Avoid extreme temperatures.
power level of the device to ensure it only uses
Avoid contact with liquids. Keep your
the minimum power required to communicate
phone dry.
with the network.
Do not attempt to disassemble your
Declaration of RoHS Compliance
phone.
To minimize the environmental impacts and take
more responsibilities to the earth we live on, this
Only use approved accessories.
document shall serve as a formal declaration
Don't rely on your phone as a
that ZTE BLADE V7 LITE manufactured by
primary device for emergency
ZTE CORPORATION is in compliance with the
communications.
Directive 2011/65/EU of the European Parliament
- RoHS (Restriction of Hazardous Substances)
Specific Absorption Rate (SAR)
with respect to the following substances:
Your mobile device is a radio transmitter and
1. Lead (Pb)
receiver. It is designed not to exceed the limits
2. Mercury (Hg)
for exposure to radio waves recommended
3. Cadmium (Cd)
by international guidelines. These guidelines
4. Hexavalent Chromium (Cr (VI))
were developed by the independent scientific
5. Polybrominated biphenyls (PBBs)
organization ICNIRP and include safety margins
6. Polybrominated diphenyl ethers (PBDEs)
designed to assure the protection of all persons,
ZTE BLADE V7 LITE manufactured by ZTE
regardless of age and health.
CORPORATION meets the requirements of
The guidelines use a unit of measurement known
Directive 2011/65/EU.
as Specific Absorption Rate, or SAR. The SAR
limit for mobile devices is 2 W/kg and the highest
SAR value for this device when tested at the
head was 0.467 W/kg* and when tested at the
body was 0.530 W/kg*.
Disposal of Your Old Appliance EC DECLARATION OF
CONFORMITY
1. When this crossed-out
wheeled bin symbol is
attached to a product,
it means the product is
It is hereby declared that following designated
covered by the European
product:
Directive 2012/19/EU.
Product Type: LTE/WCDMA/GSM Multi-Mode
2. All electrical and electronic
Digital Mobile Phone
products should be
disposed of separately from
Model No: ZTE BLADE V7 LITE ; ZTE
the municipal waste stream
BLADE V0720
via designated collection
Product Description: LTE/WCDMA/GSM
facilities appointed by the
Multi-Mode Digital Mobile Phone
government or the local
Complies with the essential protection
authorities.
requirements of Directives on Radio and
3. The correct disposal of
Telecommunication Terminal Equipment
your old appliance will help
(Directive 1999/5/EC), Restriction of the
prevent potential negative
Certain Hazardous Substances in electrical and
consequences for the
electronic equipment (Directive 2011/65/EU),
environment and human
Eco-design Requirements for Energy-Related
health.
Products (Directive 2009/125/EC) and their
For this product's recycling information based
amendments.
on WEEE directive, please send an e-mail to
This declaration applies to all specimens
weee@zte.com.cn
manufactured identical to the samples submitted
for testing/evaluation.
Assessment of compliance of the product with
the requirements relating to Directive 1999/5/EC
was performed by PHOENIX TESTLAB GmbH
(Notified Body No.0700) and assessment of
compliance of the product with the requirements
relating to Directive 2011/65/EU was performed This declaration is the responsibility of the
by Intertek Testing Services Ltd., Shanghai manufacturer:
and Directive 2009/125/EC was performed by
ZTE Corporation
Shenzhen Zoom Rel Testing Technology
Co.,Ltd. The assessments were based on the
ZTE Plaza, Keji Road South, Hi-Tech
following regulations and standards:
Industrial Park, Nanshan District, Shenzhen,
Guangdong, 518057, P.R.China
Requirement Standard
EN 50332-1:2000;
Authorised person signing for the company:
EN 50332-2:2003
Yao Cuifeng
EN 50566:2013/AC:2014;
Corporation
EN 50360:2001+A1:2012
Health and
EN 62209-1:2006;
Name in block letters & position in the
safety
EN 62209-2:2010;
company
EN 62479: 2010
th
Shenzhen, 29
EN 60950-1:2006+A11:2009+A
1:2010+A12:2011+A2:2013
Place & date
EN 301 489-1 V1.9.2;
EN 301 489-3 V1.6.1;
EMC EN 301 489-7 V1.3.1;
EN 301 489-17 V2.2.1;
EN 301 489-24 V1.5.1
EN 301 908-1 V7.1.1;
EN 301 908-2 V6.2.1;
EN 301 908-13 V6.2.1;
Radio
EN 301 511 V9.0.2
Spectrum
EN 300 328 V1.8.1;
EN 300 440-1 V1.6.1
EN 300 440-2 V1.4.1
RoHS IEC 62321:2008+ 2013+2015
ErP (EC) No 278/2009
This equipment may be
AT
operated in:
CY CZ DK EE FI
DE GR HU IE IT
LT LU MT NL PL
SK SI ES SE GB
Quality Director of ZTE
LI NO CH BG RO
March 2016
Legally valid signature
BE
FR
LV
PT
IS
TR