Table of Contents
Advertisement
Quick Links
INSTRUCTION for the Pocket Wi-fi(GP02-rev)
1.Charge Battery
a) From wall socket(outlet).
b) From PC(USB)
Full charge takes 6 hours
2.Power On/Off
Power on
Push Power button 5sec to turn
on the device. The device will
automatically connect to 3G
network.
Power off
Push Power button 5sec to turn off.
★Saving mode
The pocket WiFi will automatically switch to energy
saving mode if not used for around 10minutes press the
power button for 1sec. to turn it back on.
3. Set up Wi-Fi for Laptop or iPhone/iPad
a) For Laptop
- Select Control Panel from "Start Menu"
- Select "Network and Sharing Center", then click Connect
to Network.
-Select SSID "GP02-xxxx" or back of the pocket wifi then
click connect.
-Type in WEP key. Your WEP key is on the back of
Pocket Wi-Fi device. Then save.
b) For iPhone/iPad
- Select Settings icon and General, then touch "Network"
and Wi-Fi.
-Select SSID "GP02-xxxx" or back of the pocket wifi then
click connect.
-Type in WEP key. Your WEP key is on the back
Pocket Wi-Fi device. Then save.
Full charge takes 4 hours
Advertisement
Table of Contents
Related Manuals for Y!mobile GP02
Summary of Contents for Y!mobile GP02
-
Page 1: Power Off
- Select Control Panel from “Start Menu” - Select “Network and Sharing Center”, then click Connect to Network. -Select SSID “GP02-xxxx” or back of the pocket wifi then click connect. -Type in WEP key. Your WEP key is on the back of Pocket Wi-Fi device. - Page 2 Reset Pocket Wi-Fi If you have any issues, Please reset Pocket Wi-Fi Device as following. Don’t push (Some PW doesn’t have reset) much. Please open the battery cover, then press reset button. Return Checklist Pocket Wi-Fi device. AC charger USB cable This Manual - Prohibited Actions –...
Need help?
Do you have a question about the GP02 and is the answer not in the manual?
Questions and answers