Table of Contents
Advertisement
ENGLISH
Picture Menu
Light Level: Set the overall brightness of the screen.
Picture Mode: If you'd like to configure the settings for your
picture, then there are seven types of picture modes available:
Vivid, Standard, Energy Saving, Theater, Game, Sport and
Calibrated.
Once you choose the mode, you can adjust the picture based on the
following settings:
Contrast: Adjust the Contrast level to increase or decrease how
bright images appear.
Brightness: Adjust the Brightness level to generate lighter or darker images.
Color: Adjust the color intensity of the picture for a more vibrant image.
Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen.
Sharpness: Adjust how sharp or soft edges of images appear.
Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following
settings: Auto, Normal, Zoom, Wide, Direct, Dot-By-Dot, Panoramic or Cinema.
HDMI 2.0 Format: Match the connected device output format. Select Enhanced for devices of 4K, 60Hz, 4:4:4 4:2:2
or 4:2:0, 10 bit and above.
Advanced Picture Options: Adjust advanced picture settings based on your viewing preference.
• Overscan: Change the video size settings to slightly crop the edges of the displayed image.
• Color Temperature: Select a preset color temperature. Adjust how warm(red) or cool(blue) the white areas of an
image appears.
• Motion Enhancement: This setting minimizes afterimages that are left on the screen when viewing fast-moving
objects. You can adjust it from Smooth, Standard, Clear, Film,Custom or Off. A Smooth setting will produce a
smoother picture whereas a Clear setting will result in a picture that has less motion blur.
• Judder Reduction: To enhance the picture, try to reduce judder (shakiness). However, reducing judder may
cause the picture to blur.
• Digital Noise Reduction: Improve how clear the picture appears by reducing noise.
• HDMI Dynamic Range: Adjust the HDMI signal range to be more suitable for the content.
• Active Contrast: Automatically darken dark areas and lighten light areas of images to increase the contrast.
Calibration:
• Color Tuner: Adjust the Color, Hue, Saturation and Brightness of color settings.
• White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the
picture.
• Gamma Adjustment: Adjust the Gamma to choose how the TV will respond to the content grayscale. In a dark
room choose a Higher number like 2. In a brighter area select a lower number like 0. In general, 1 is normally
recommend.
• RGB Only Mode: View images based on default settings or choose the color red,blue or green.
Apply Picture Settings: Adjust current picture mode to apply to all sources or just current source.
Reset Picture Settings: Reset all the picture settings in the current picture mode to the factory default values.
Screen Menu
Projection Mode: Flip the image over top-to-bottom and/or left-to-
right based on the positioning of your TV.
Screen Type: Select the proper type to match the screen that you
are using.
Geometric correction: Select points and move to fit the projected
image into the screen.
Picture
Set the overall brightness of the
screen.
Screen
Flip the image over top-to-
bottom and/or left-to-right based
on the positioning of your TV.
19
Light Level:15
Picture Mode: Energy Saving
•
Contrast: 50
•
Brightness: 50
•
Color: 55
•
Tint: 0
•
Sharpness: 10
Aspect Ratio: wide
HDMI 2.0 Format
<
>
Standard format
Projection mode:
Front
Screen Type: ALR
Geometric correction
Phase: 10
Clock: 10
Auto Adjust
Focusing
Advertisement
Table of Contents
