Advertisement
PRODUCT FEATURES:
Power
Manual tone
adjust
White Noise Tones
• Soothe • Mask • Relax • Calm
INSTRUCTIONS FOR USE:
1. Unpack the product and check to make sure the adaptor is included. (Fig. 1)
2. This unit is powered by an AC adaptor or by four "AA" batteries (not included).
3. Attach the AC adaptor jack to the base of the unit and insert the adaptor into
a 220V household outlet.
4. To install batteries, remove compartment cover. Insert four "AA" batteries
into the compartment on the bottom according to the polarity indicated.
Replace cover and snap into place.
How to Use Your Deep Sleep
Once you have decided where to place your Deep Sleep for optimal results,
follow these steps to create your perfect sleep environment.
1. Press the POWER button (Fig 1)
2. Press the
button to scroll through the sound selections. Each tone name
will light up as selected. We have FOUR distinct tones—one is sure to be
right for you:
Soothe: Like a soft rain, this tone has the lightest pitch- easing your mind
gently
Mask: Effectively blocks external distractions including noisy neighbors and
highway traffic
Relax: Modulated to disrupt interfering room noise,
such as snoring
Calm: The deepest of all tones- perfect for tinnitus
sufferers or small children
3. Once you select the tone that suits your needs, you can
adjust the sound by pressing the TONE button (Fig 1)
up and down. Press and hold the "+" symbol to remove
bass and achieve a higher pitch. Press and hold the "-"
symbol to add bass and achieve a lower pitch.
4. Finally, to adjust the VOLUME, press and hold the "+"
or "-" symbols on the VOL button (Fig 1).
All indicator lights will automatically go dark 10 seconds
after the last selection is made. Pressing any button will
reactivate the lights for another 10 seconds.
Your Deep Sleep unit is now set. When you wake in the
morning and power off the unit—don't fret. You will not
have to reset your choices. Your Deep Sleep is
programmed to remember your settings when you power
the unit back on.
Adaptor
Using the Auto-Timer
1. When the power is on and you are listening to a white noise tone, you may
set a timer so the unit will automatically turn off.
2. Toggle through the TIMER button (Fig. 2) until the corresponding LED
illuminates next to the time of your choice, 30, 60 or 90 minutes. The unit
will automatically shut off after the selected time and the POWER LED (Fig.
2) will remain lit showing you it is still in timer mode. If you chose to listen to
another timed sound, press the timer button to select a desired time. Or if you
choose to listen to the sounds continuously, turn the unit off and then back
on.
NOTE: Do not select the TIMER button if you wish to listen to the sounds
continuously.
30
3
Volume adjust
Fig 1
Power ON/OFF
Timer ON/OFF
60 90
Fig 2
Advertisement
