Advertisement
The bike can now be started using either the ignition key or
the remote control.
To switch on the bike with the key, locate the power key socket below
and to the right of the handlebars. Select the ignition key. Insert the
key and turn to the 'ON' position. The information display will light up
and you are ready to go. The throttle is operated by the right handle
on the handlebar.
To start your
E
RIDER without inserting the key, press the start key
button (lightning flash) on your remote twice. You will see the panel
light up and you are ready to go by turning the throttle on the right
handlebar handle as above.
Advertisement
