DERMAPEN PRO User Manual

Caution before use:
• Before inserting needle to Dermapen™ handle, check the needles condition
1. Grip the needles tail and push several times
2. Check needles spring and make sure the needle's smooth movement.
To insert needle:
1. Holding the depth controller, Insert needle turning in a clockwise direction
2. Do not squeeze or over turn
To separate needle:
1. Hold the depth controller, remove needle tip and turning counter-clockwise till needle comes out
2. Separate needle.
Warranty:
1. This product is manufactured under strict quality control and inspection processes.
2. Warranty is to cover the operating defaults after the purchase during the warranty period (12 months after the purchase)
3. If this product goes out of order under the normal customer use, we will repair it free of charge during the
warranty period.
5. The damages (defaults) prescribed below are NOT to be covered by warranty.
• Users faults by lack of care, keep out of water,
• Unauthorised electric currency connection defaults
• Faults by the users own intention or unauthorised repair
• Damages caused by natural disaster. (Fire, Flood, Earthquake, lightning etc)
• Replacement to new parts
6. Validate your warranty by visiting www.dermapenworld.com
Dermapen is a trademark of Equipmed. 283 Mona Vale Road Enter via 56A Myoora Road Terrey Hills
TM
NSW 2084 Australia. www.equipmed.com. Equipmed hold no responsibility for treatment outcomes as
individual patient results may vary. The Dermapen device is to be used only as directed.
1023
Dermapen is certified and registered. EQUD3P1002. 12/13
U S E R M A N U A L
AOVN
TM
P R O