Advertisement
2.2 Video Display
Dip switches No.5-6：
2.3 Dip switches 7
OFF is picture mode ；ON is video mode.
Under video mode, the VIDEO PLAY is Loop playback.
2.4 Dip a switch 8th is for CAN bus terminal.
3. Pictures/ Video Production
If users want to play pictures by flash disk,
3.1 Please create a new file named as PIC inside flash disk
3.2 Copy the first picture file named as 000 in the PIC file inside T10 to PIC
inside flash disk, then copy other pictures;
If users want to play video,
3.3 Please create a new file named as PIC inside flash disk
3.4 Name the new video file as 01.avi、02.avi、03.avi.
Remark Other pictures should be changed in accordance with the size of the
originals (1040×590) and be named originally.
4. Car call display and Hall call display switches
The product is mainly used as car hall display. If users want to use as hall
call display, please link briefly with S1 skipping pin in power
disconnection state, floor can be displayed 20 seconds after power
connection, at the moment users can set the floor in accordance with
binary system, the same as normal hall call board. After setting the floor,
disconnect S1 about 2 seconds and then disconnect power, users can
record the floor set. If it is used as car call display, it can display overload
but not full load. If it is used as hall call display, it can display full load but
not overload (the 8
volume and state display form can be set as already stated previously
2 | P a g e
Display Language
Simple Chinese
Tradition Chinese
English
Spare
th
th
DIP switches are off). After power reconnection,
T10-LCD DISPLAY
th
th
5
6
OFF
OFF
ON
OFF
OFF
ON
ON
ON
.
Advertisement
