Bedrooms Plus Space Pro Tower Storage Unit DIY Assembly Manual

tower unit 3 & 4 drawers
(400 & 600mm wide)
Assembly Instructions
CONTENTS: I Drawer sides (left)
A 1x Top panel
3 Drawer Unit
• 3x left
B 1x Side panel (left)
4 Drawer Unit
C 1x Side panel (right)
• 4x left
D 5x Shelves
J Drawer sides (right)
(4x for 4 drawers)
3 Drawer Unit
• 3x
E 1x Plinth panel
4 Drawer Unit
F Soft close drawer runners
• 4x
3 Drawer Unit
• 3x left, 3x right
K Drawer bases
4 Drawer Unit
3 Drawer Unit
• 4x left, 4x right
• x3
4 Drawer Unit
G Soft close clips
• x4
3 Drawer Unit
• 3x left, 3x right
L Drawer fronts
4 Drawer Unit
3 Drawer Unit
• 4x left, 4x right
• x3
4 Drawer Unit
H Drawer backs
• x4
3 Drawer Unit
• x3
M Drawer handles
4 Drawer Unit
3 Drawer Unit
• x4
• x3
4 Drawer Unit
• x4
Page 1 of 6
Tower Storage Unit DIY Assembly Guide
Tower unit pack
28x 28x 2x
Cams Dowels Wall mounting
brackets
Drawer pack
12x 12x 12mm 12x 35mm
Euro Screws Wood Screw Wood Screws
(16x for (16x for (16x for
4 drawers) 4 drawers) 4 drawers)
6x 7mm 6x Handle 12x Cams
Wood Screws Screws (8x for (16x for
(8x for 4 drawers) 4 drawers) 4 drawers)
12x Push Dowels
(16x for 4 drawers)
www.spacepro.co.uk/instructions-2/
We recommend you use the Wall
Mounting Brackets provided to fix the
Tower Unit to a wall (where possible).
This will prevent the unit being pulled
over. Use suitable fixings.
Bedrooms Plus, 2 Murray Court, Hamilton ML3 9SL • Tel: 01698 209888
Email: supply@bedroomsplus.co.uk • Web: www.bedroomsplusonline.co.uk
Recommended:
• Tools:
Screwdriver & Hammer
• Two person build
SPR_INSTRUC_TU_DR_05.2016
V1