Related Manuals for FIREtec FKEP2
Summary of Contents for FIREtec FKEP2
- Page 1 (FKEP Series) Conventional Fire Control Panel (FKEP2, FKEP4, FKEP8) User Manual Man-1082EL Issue 01 February 2014...
- Page 2 Fire alarm condition General fire indicator lights and zonal fire indicators flash. Buzzer pulses rapidly. Carry out fire procedure Fault condition General fault indicator lights and specific fault indicators flash. Buzzer sounds continuously Call maintenance engineer Man-1082EL_FIRETEC_01 Page 2 of 6...
- Page 3 Disabled condition General disablement indicator and specific fault indicator lit continuously. Maintain vigilance during disablement conditions Test condition Test indicator and specific fault indicator lit continuously. Ensure system is returned to normal when testing is finished Man-1082EL_FIRETEC_01 Page 3 of 6...
- Page 4 How To Do This Display Comments Alarm/Fault Buzzer Silenced Silence buzzer Alarm/Fault Buzzer Silenced Press button Lamp Test Test lamps Buzzer sounds whilst button is pressed All lamps on Press button Enable Enable buttons Buzzer beeps twice Control every few seconds (Only Alarm/Fault warning Silence and Lamp Test buttons are...
- Page 5 Comments How To Do This Display Mode Put a zone into test mode step 1 First display Press button Select Zone 5 for example Put a zone into test mode step 2 Press button to Zone 5 scroll zone General Fire in Zone Put a zone into test Enter...
- Page 6 Comments How To Do This Display Mode Disable sounders step 1 Press button till db is displayed Enter Dot flashes to indicate Disable sounders bells disabled. step 2 General disablement and Sounder Fault/Disablement Press button indicators lit Mode Flashing dot indicates Enable sounders bells disabled.
Need help?
Do you have a question about the FKEP2 and is the answer not in the manual?
Questions and answers