1. Instructions Summary 1.1 Introduction to L7000 • By leveraging the perfect combination of biometrics and cryptography, our fi n- gerprint locks ensure double security through the fi ngerprint + password unlocking feature. • The state-of-the-art Organic LED (OLED) display affords crisp bright readouts and makes our fi...
Summary 1.3 Installation Requirements * Ensure environment be- fore ordering units • The fi ngerprint lock is applicable to doors of 35–50 mm in thickness. Be sure to list your special requirements or remarks for fi ngerprint locks to be installed on doors in excess of 70 mm in thickness before placing an order.
Summary • Please confi rm the door opening directions. Assume you are standing outside and facing a door and then there are four door opening directions: Left inward, left out- * Ensure correct installation ward, right inward and right outward. Left inward/outward means the door swings inward/outward with hinges on the left;...
1.5 Front and Rear View Summary * Be farmiliar with the unit • Number key 1: Press this key to exit current operation, press and hold this key to power off the fi ngerprint lock. The number key “1” doubles as ESC key. * Keys on the unit •...
Summary Note: When you cannot power off the fi ngerprint lock due to the exception of program, press and hold the ESC key to power off and then restart the fi ngerprint lock. It is not rec- ommended to power off the fi ngerprint lock by pressing and holding the ESC key when the fi...
Summary 2) Press and hold the Menu key for three seconds to access the menu interface. Press DOWN to select “Options” and press MENU to display the setting interface. 3) Press DOWN to select “System Opt.” and then press MENU. 4) Press MENU to select “Date Time”.
Summary 2.1.1 Enrol a Fingerprint 4) Press ▼ to select “Enroll FP” and then press MENU. 5) Press ▲/▼ to select “Admin Accredit”, and then select “Supervisor” (Super administrator) or “Ad- min” (Administrator). Press MENU to confi rm your selection. 6) Press MENU to continue.
Summary 2.1.2 Enrol a Password 4) Press ▼ to select “Enroll Pwd” and then press * Password users can be MENU. enrolled if FP is unavailable 5) Press ▲/▼ to select “Admin Accredit”, and then select “Supervisor” (Super administrator) or “Ad- min”...
2.2 Enrol a User Summary An administrator can enroll only ordinary users, with operation steps as follows: 1) Power on the fi ngerprint lock by pressing the * Administrators need to MENU key to open up the initial interface. enrol users 2) Press and hold the Menu key to access the menu options.
2.4 Set User Verifi cation and NO Status Summary 1) Press the Start key to display the initial interface. * NO - Normal Open The fi ngerprint sensor is in active state. * Use NO if door is handling 2) Press your fi nger with fi ngerprint already enrolled high volume traffi...
Summary 4) Press MENU to display the “User Manage” inter- face. 5) Press ▼ to select “Delete User”, and press MENU. 6) Press ▲/▼ to select the user ID that you want to delete and then press MENU to confi rm your selec- tion.
Summary 3) Press 3 to select “Options”, another press Menu to enter the menu. 4) Select “Operate Opt”, and press Menu to enter the menu. Select “Options” RIGHT KEY “Set Opt.” from the main menu to display the following information: 3.1.1 Operate Alarm Setting It is used to set if the operation failure trigger the alarm.
Summary 3.1.3 Lock Settings This parameter is used to set the duration from successful matching to unlocking. Note: The unit of quantity and the maximum value of this parameter here are standard confi gurations. If you need larger parameter values, please consult our commercial representatives or pre-sales technical support engineers.
3.2 Language Settings Summary Select “Options” RIGHT KEY “System Opt.” RIGHT KEY “Language” from the main menu to display the following information: * Ensure corret language have been selected Press OK to display the Language interface, and press ▲/▼ to select a desired lan- guage.
Summary Press ▲/▼ to select Free Space Info and then press OK to browse the following informa- tion: * Free space need to be monitored if you have great number of users Note: Only the fi ngerprint locks supporting ID cards are confi gured with the “Reg FPID” and “Free Space Info”...
Summary 1. Download ATT Logs 1) Press ▲/▼ to select “Dwn AttLog” and then press OK. When download completes, the following interface is displayed: 2) Press ESC to return to the initial interface and then remove the USB pen drive. Now the USB pen drive stores two fi...
4.2 Administrator Loss Prevention Summary To avoid the menu operation failure as a result of loss of administrator, you may take the following measures: Press and hold the Menu key for 3 seconds to display the admin- * Manual override on ad- istrator verifi...
4.5 Unlock with Emergency Key Summary You can open the door using an emergency mechanical key in case the electronic- component does not operate. * Emergency Key provided to open in case of emer- • Try open the keyhole cover by inserting the sharp end of a ball-pen or screwdriver gencies with a diameter of less than 3 mm.