Advertisement
Notes for the finish and the RC installation
Ironing spoiler pad F19
before sticking the pad
into the wing.
As cover film Oralight is
proved to achieve a low
take-off weight.
For stronger stress use
Oracover.
Installation proposal for the spoiler
servo.
Making balsa crossbars from remains and
glue the servo with superglue.
Depending on the servo used it may be
necessary that the balsa rib must be cut
out in accordance with the servo size.
Torsion spring of elevator.
0,5mm steel is two times
90° bent and stab into the
ribs twistend counter-
clockwiese to the rope
tension.
Glue the control horns
after ironing with
superglue in the slots of
elevator and rudder.
Grind the gluing surface of
the horns slightly before
gluing.
23
Advertisement
