NMS Communications PA Hyper-T3 DS3 User Manual

REGULATORY NOTICES
UNITED STATES
Federal Communications Commission (FCC)
FCC Part 15 Rules, Subpart B § 15.105
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at its own expense.
CANADA
Industry Canada ICES-003 Issue 2:
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de Classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
EUROPE
CE Compliance
The PA Hyper-T3 platform meets the following European Directives:
89/336/EEC EMC Directive
73/23/EEC Low Voltage Directive
To achieve CE compliance, be sure to select a host that already meets the EMC and Low Voltage
Directives before the addition of any optional board.
SAFETY REQUIREMENTS
UL/C-UL Listed Certifications
The PA Hyper-T3 platform is certified to meet Information Technology Equipment safety
standards UL 1950 3rd edition, CSA 22.2, No 950.
Copyright © IML 2000
PA Hyper-T3 DS3
QUICK INSTALL
Picture does not exactly represent final product
Static electricity can damage sensitive electronic components.
Discharge your body's static electric charge by touching a grounded surface e.g., the metal area of the
computer chassis − before performing any hardware procedure.
The manufacturer assumes no liability for any damage caused directly or indirectly, by improper installation of
any components by unauthorized service personnel. If you do not feel comfortable performing the installation,
consult a qualified computer technician.
PACKAGE CONTENT
PA Hyper-T3
Rear Access I/O
Quick Installation
DOCUMENTATION
The User's Guide and the API Guide documentation are available on our website:
http://www.nmss.com/support/nms_support.nsf
Natural MicroSystems - NNA
4200, La Périère, St-Hubert, Qc, Canada, J3Y 9G3
Tel. (450) 676-2977 Fax (450) 676-0360
http://www.nmss.com
9000-00063-01c
DS3/T1 resource adapter with onboard CPU
Adapter for rear access connection
This document
(Product Manuals)