Do you have a question about the PLA100-RGB and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Spectravision PLA100-RGB
Page 1
Ultra thin LED lamp for Pool & Spa OWNER’S MANUAL Adagio Color Cool white Warm white Blue Your ADAGIO+ color Pool-light is an advanced underwater luminaire with high quality LEDs...
Technical specifications Reference Description Voltage Power Nominal CCT n.a. PLA100-RGB RGB color 100mm 9-13 V AC 55 W n.a. PLA170-RGB RGB color 170mm 9-13 V AC 80 W PLA100-WH (-KAD) Sun White 100mm 9-13 V AC 35 W 5650K PLA170-WH (-LC)
Warning: The back side of the lamp and the driver tube have to be exposed to free flowing Installation instructions water during operation. Fixing the lamps with ad- hesives or silicone kit into a niche is not allowed and will void the warranty. STEP 1 STEP 2 STEP 3...
Wiring instructions Setup 1 Each lamp is connected to the transformer by a separate cable (Preferred for new installations) Max cable length 4m cable included in lamp package Separate cable (not included) * Toroïdal transformer is preferred because of better efficiency page 5 page 6 of 16...
Page 7
PLA170-WH (-LC) PLA170-WW (-LC) PLA170-BL PLA100-RGB PLA170-RGB * The transformer VA rating must be greater or equal to the sum of VA ratings of all connected lamps. These cable lenghts are calculated with worst case voltage drops in the electrical wiring.
Wiring instructions Setup 2 All lamps are connected to the transformer via 1 cable Max cable length 4m cable included in lamp package Separate cable (not included) * Toroïdal transformer is preferred because of better efficiency page 8 of 16...
Page 9
PLA100-WW PLA100-BL 100m PLA170-WH (-LC) PLA170-WW (-LC) PLA170-BL 110m PLA100-RGB 7,5m 7,5m 12,5m PLA170-RGB 7,5m * The transformer VA rating must be greater or equal to the sum of VA ratings of all connected lamps. These cable lenghts are calculated with worst case voltage drops in the electrical wiring.
Retrofit with PAR56 niche (only PLA170) RETROFIT
W ITH
P AR56
N ICHE
( ONLY
P LA170)
RETROFIT
W ITH
P AR56
N ICHE
( ONLY
P LA170)
RETROFIT
...
Page 11
14 Color programs (only for RGB lamps) 7 fixed colours 4 dynamic colors 3 white tones DEEP BLuE SEA JuNGLE, BEACH SuN WHITE Saturated blue Cool white Saturated blue Light blue, Azur blue Mid blue, Light blue DAYLIGHT BLuE NEuTRAL WHITE (slowly changing) Light blue Neutral white...
Page 12
Synchronizing & color changing Option 1: Classic ON/OFF control Only in combination with the following devices: Manual synchronization procedure PL-REM(-P), PL-REM-60, PL-REM-200 Switch ON the 12 VAC line voltage and make sure that all lamps light up. Each lamp can be in a different program now.
Page 13
Synchronizing & color changing Option 2: Intelligent PLC control Only in combination with the following devices: PLA-REM and PLA-REM-300 • When the intelligent PLA-REM or PLA-REM-300 are used, the RGB lamps are automatically synchronized • All the color programs and white tones are dimmable •...
Troubleshooting PROBLEM SOLUTION The pool light is flickering 1. Switch the lamps ON For RGB lamps: select the Sun White color program 2. Measure the voltage at the lamp terminals 3. The voltage at the lamp should be at least 9VAC 50/60hz. If the measured line voltage is below 9VAC: A.
Page 16
Contact details Propulsion Systems bvba Dooren 72 1785 Merchtem, Belgium Tel +32 2 461 02 53 Fax +32 2 706 59 60 www.propulsionsystems.be info@propulsionsystems.be We reserve the rights to change all or part of the contents of this document without prior notice page 16...
Need help?
Do you have a question about the PLA100-RGB and is the answer not in the manual?
Questions and answers