Page 1
INSTALLATION INSTRUCTIONS AND SPECIFICATIONS FOR MODEL 3465-E READ CAREFULLY MIRACO A DIVISION OF AHRENS AGRICULTURAL INDUSTRIES, INC. BOX 686 GRINNELL, IOWA 50112 PHONE 641-236-5822 TOLL FREE 1-800-541-7866 FAX 1-641-236-3341 Website: www.miraco.com...
Page 2
It also prevents tongue injuries from contact with frigid steel. Model # Capacity Gallons Description Dimensions Weight 3465-E * 100 hd. beef " openings 24" x 36" x 18" * 40 hd. dairy ball closures #834 insulated tube COMMON SENSE MANAGEMENT TIPS TO CONSIDER WHEN BUYING AN ENERGY FREE WATERER: #1 A minimum of 20 head of livestock need to be using the waterer dur- #4 The MiraFount must be the primary source and livestock should ing subzero weather.
Page 6
Screw the valve into the “T” fitting so the valve is tight. In most cases, hand tight is sufficient. If wrenches are required, be careful not to over tighten. Valve should be straight up and down when tightened. Valve should be back tight against the 4"1185 riser pipe.
(1) year from delivery. Such warranty does not apply to any Miraco unit that has been subjected to misuse, or material failure to install, operate or maintain in accordance with Miraco’s written instructions, or other events acts or omission, including but not limited...
Page 12
MODEL #3465-E MANAGEMENT TIPS A 1/4" bolt is to be used to hold the balls back for training livestock. The 1/4" bolt is inserted into a threaded insert in the baffled portion of the lid. This holds the balls back for training. For short periods of time when you’re not using the MiraFount in winter, you can dip 3-5 gallons of water out every day and the tank will sustain itself until livestock are using it again.
Need help?
Do you have a question about the MiraFount 3465-E and is the answer not in the manual?
Questions and answers