Farallon NetLINE Setup Manual page 4

™
NetLINE Setup Guide
Client configuration using fixed IP Addresses
configuring 2 If using DHCP (as described on page 3) does not work for your local network, you can manually assign each computer a specific IP Address
as described below.
client
Using fixed IP Addresses for Macintosh clients
computers
1. Open the TCP/IP Control Panel.
2. Select Ethernet (or Wireless or AirPort or whichever port you
are using to connect this computer to your local network)
from the Connect via menu.
3. Select Manually from the Configure menu.
4. Enter the following information into the TCP/IP panel:
IP Address: 192.168.0. x , where x is any number from 2 to 252.
Each computer on the local network needs a distinct IP Address.
Subnet mask: 255.255.255.0
Router address: 192.168.0.1
Name server address: Enter the Domain Name Server informa-
tion from your ISP.
Search domains: Enter the information from your ISP.
5. Close the TCP/IP Control Panel, saving your settings.
Next, see Client connection on page 5 of this user guide.
Using fixed IP Addresses for Windows PC clients
1. Right-click on the Network Neighborhood icon on the desktop,
then select Properties.
If TCP/IP is not listed, you will need to add it,
using your original Windows CD or .cab files. After TCP/IP is added,
exit Network Properties, restart your PC, and return to the Network
configuration panel.
2. Select the TCP/IP > Network
card entry, in the Network config-
uration panel. Click the Properties
button. Click the IP Address tab
and enter the following:
IP Address: 192.168.0.x, where x
is any number from 2 to 252. Each
computer on the local network
needs a distinct IP Address.
Subnet mask: 255.255.255.0
3. Click the DNS Configuration tab
and enter the DNS information
provided by your ISP.
4. Click the Gateway tab and enter
the IP Address of the NetLINE
Wireless Broadband Gateway
into the Gateway IP Address
field: 192.168.0.1.
5. Click OK and restart the PC.
Next, see Client connection on page 5 of this user guide.
4