MODEL:1638410 Bluestem ASSEMBLY INSTRUCTIONS ATTENTION DO NOT RETURN TO THE STORE Contact MD Sports Customer Service * For additional resources and Frequently Ask Questions, please visit us at themdsports.com...
Page 2
3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy. Thank you very much. 1638410 (Continued on the next page.) www.themdsports.com...
WARNING: Adult Assembly Required. WARNING: Strong Adults Needed No Children in Keep away from pets Do not use or keep product Assembly Area outdoors. For indoor use only. No wet/humid conditions. 1638410 (Continued on the next page.) www.themdsports.com...
Page 4
1638410 PARTS LIST Mainframe Right Leg End Leg Panel Left Leg Allen Key 3.5×18mm Screw 6x35mm Bolt Washer Triangle Leg Leveler Billiard Ball Set Chalk Brush 1638410 PRE-INSTALLED PARTS Square Nut with Screws ASSEMBLY INSTRUCTIONS: 1. Find a clean, level place to begin the assembly of your Billiard Table. The table will be assembled upside down and then turned over on its legs once the assembly completed.
Page 5
4. Screw the Leg Levelers (#9) into the bottom of each leg. FIG. 2 X 12 FIG.2 5. Attach the End Leg Panels (#4) to the Legs using six Screws (#8) per End Leg Panel. See FIG. 2. 1638410 (Continued on the next page.) www.themdsports.com...
Page 6
Do not lean or sit on the end or side rails as this may damage the table. YOU ARE NOW READY TO PLAY! 1638410 (The last page) www.themdsports.com...