Always unplug the unit from mains before cleaning the unit. Do not use solvents of any kind to clean the unit, only use a soft-dry cloth. Sonneteer reserves the right to change specifications without prior notice. The contents of this box:...
Mains ON/OFF switch. To avoid “pop” noises, the Sedley should be switched FIRST ON, LAST OFF in your system, or make sure that your amplifier volume is turned down when switching your Sedley ON or OFF, or when adjusting the DIP switches.
Page 4
RIGHT CHANNEL DIP SWITCHES: Switch Function Switch position RIAA/IEC Up = IEC Warp Filter selected, Down = RIAA selected MM/MC Up = MC (High Gain), Down = MM (Low Gain) 220pF Capacitance loading, Down = selected 100pF Capacitance loading, Down = selected 10pF Capacitance loading, Down = selected 47pF...
Page 5
Setup examples View of back panel from rear Below we have provided some standard DIP switch default settings for your reference. For MM (Moving Magnet) cartridges: Setting 1: RIGHT Channel : Switch 1 and 6 DOWN, remaining switches UP. LEFT Channel : Switch 5 and 10 DOWN, remaining switches UP.
Page 6
USB cable is disconnected. The Sedley USB section is powered by your computer, not the Sedley, hence it will not interfere with the Sedleys dedicated power supply for audio. Plug and Play: The Sedley does not need any additional drivers other than those supplied with your computer’...
Page 7
Sedley USB installation (PC with XP installed): As the Sedley USB section is powered by the USB port, the Sedley does not need to be connected to the mains for installation or PC music playback. Installation: If your PC is not already switched on, switch on your computer.
Page 8
Software installation guide: To use your computer to back up your vinyls using your Sedley USB, you will need to use a recording program (or software) of some description. There are many programs available that will work with the Sedley USB, but to get you started we have included 2 programs for you in the supplied CD.
Page 9
Click OK. Note: With Simultaneous playback checked you can listen to the recording progress with the Record Monitor on the Sedley switched ON. (Record Monitor is described later in this manual). Recording: On the recording screen we recommend that you set the Volume to 100 and then check the Auto Level Box.
Page 10
When you have finished press stop and save the file. To listen to your recorded files simply press play. (with the Record Monitor switched ON on your Sedley you can listen to your recording through your Hi Fi system) For more information please read Audacity help files.
Page 11
Listen to you recording using the ‘Record Monitoring’ facility: On the underside the Sedley towards the front you will find a switch for the Record Monitoring facility. When your Sedley is not connected to your computer, always leave the switch in the OFF position (as shown), or no sound will be heard from your Sedley.
Page 12
USB Composite Device. Close your Device Manager. To check if the USB Audio Codec was selected by your system: Normally as soon as your Sedley is plugged into your PC it will auto- matically registered as your new audio device.
Page 13
To get the appropriate operation, one of the following operating systems must be working on the host PC that has the USB port assured by the manufacturer. If the condition is fulfilled, the operation of the Sedley does not depend on the operating speed of the CPU.
Fuse Values: UK/Europe/Australasia 230V/240V, T 1.6 Amp US/Canada 110V/120V, T 2.0 Amp Sonneteer reserves the right to change specifications without prior notice. If a fault occurs, please refer to your dealer. Do not attempt to repair the unit yourself! ...
Need help?
Do you have a question about the SEDLEY and is the answer not in the manual?
Questions and answers