Activating Embr Wave; Adjusting The Temperature; Turning On And Off - Embr Labs Embr Wave User Manual

2. ACTIVATING EMBR WAVE

Want cool?
Hold here.

Turning on and off

1. Click anywhere on the Light Bar to wake up the
device. The Light Bar will turn on.
2. Hold down the left (blue) side of the Light Bar to
start cooling, or the right (red) side to start warm-
ing. Release when the device has reached a pleasant
temperature.
3. Each cooling session lasts 3 minutes. Each
warming session lasts 5 minutes. You can repeat
sessions any time.
4. To turn off, firmly press the middle of the light
bar until you feel both sides click.
PRO TIP: If your session has ended in the last few
minutes, you can reactivate it by double-tapping the
aluminum body with your knuckle.

3. ADJUSTING THE TEMPERATURE

There are multiple levels of warming and cooling.
During operation, you can hold down the left side of
Want warmth?
the Light Bar to lower the temperature, or the right
Hold here.
side to raise it.
For finer adjustments, you can also click the left or
right side of the Light Bar.
When in Warming Mode, Embr Wave will glow red.
When in Cooling Mode, it will glow blue.
When you've reached the maximum cooling or
warming temperature, the Light Bar will blink to let
you know!
colder warmer