Advertisement
BRIEF OF PRODUCT
* Sensor (COMS )
Adopt SONY 1/3" CMOS Sensor.
* Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
* Scanning Mode
NTSC or PAL mode.
* OSD SETTING
3D-NR
ON/OFF
GLOBAL
CENTER
CENTER WEIGHT
AE MODE
BLACK LIGHT
FRONT LIGHT
DISTINGUISH
DETAIL
SHARPNESS
EDGE
IMAGE
IMAGE ENHANCE
AUTO
CONTRAST
MANUAL
GAIN MAP
AUTO
SATURATION
MANUAL
ON
MIRROR
OFF
ON
FLIP
OFF
BRIGHTNESS
0.10.20......250
ZOOM IN
50. 60. 70. 80. 90.
AUTO
DAY&NIGHT
IR-CUT
AWB-PRO
AWB-TEMPORAL
AWB-AI
WB
AWB-SZ
AWB-GW
AWB-CCT
COLOR
MO-
STATUS
ON/OFF
HORIZON SIZE
AREA NO.0
VERTICAL SIZE
HORIZON MOVE
VERTICAL MOVE
ZONE MASKING
AREA NO.1
AREA NO.2
AREA NO.3
AREA NO.4
AREA NO.5
AREA NO.6
AREA NO.7
WEAK
LOW
SENSITIVITY
MIDDLE
HIGH
STATUS
ON/OFF
COLOR
BLACK \ WHITE \ YELL
DIRECTION
HORIZON SIZE
AREA NO.0
VERTICAL SIZE
HORIZON MOVE
VERTICAL MOVE
AREA NO.1
AREA NO.2
AREA NO.3
ENGLISH
LANGUAGE
CHINESE
LOAD DEFAULT
SOFT VERION
SAVE&EXIT
EXIT
CONNECTING
KEY BOARD
UP
LEFT
DOWN
AUTO
MANUAL
VALUE (0-15)
TROUBLE AND SOLUTION
AUTO
MANUAL
VALUE (0-15)
VALUE(0-255)
1. No Picture after providing power
. May be the power supply voltage abnormity, please check the power
VALUE(0-15)
supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be connected
correctly or not.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. The fluorescent lamp's electromagnetic field cause color roll. This is proper
0
phenomenon of the cameras.
0
0
. Reduce the fluorescent lamp numbers or increase the distance between the
0
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture smear too mass
. The power supply's voltage unstable.
. Connecting cables not connect correctly or have high impedance.
Notes：
●The power supply must through safe attestation. Its output voltage,
current, voltage polarity and operating temperature must match the
camera's requirement.
●When using the camera in the thunderbolt condition,please note to
mount Anti-thunder device or put off the power supply plug and cable.
●In order to capture high quality pictures, the power supply's cable and
video output cable should not be too long.
Monitor
CDMC-1000
MENU
Link wire rule：
RIGHT
Video
Power
PRESS
DC12V Power Supply
INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits
CDMC-1000
adopt the latest SONY technical of sensor and driver. The
Video
most attractive characteristics are small and easy hidden,
suits the elevator and corridor. In addition, it owns the
characters of high definition and stability, strong anti-
jamming, rich and real color. Fixing and using this model
are convenient too. It is very good for you to apply to your
DC12V
CCTV system.
Please read this instruction manual carefully to en-
sure proper use of the product.
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
The symbol is intended to alert the user to the presence of
uninsulated 'dangerous voltage' within the product's
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
CAUTION:
TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
Note:
● Please note the camera's operating temperature and its using
environment requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature is -30~+60℃.
(Recommendatory operating temperature is -10~+45℃.)
● Never make the camera face the sun or bright object. Other-
wise, it will damage the CCD.
● Do not mount the camera near by the radiator or heater.
series product. We
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
Advertisement
