Outback STX Quick Reference Manual

To delete all jobs:
Exporting a Job
To export a single job:
Insert USB Select
drive in
job to
terminal export
To export all jobs:
Insert USB
drive in
terminal
Importing a Job
Job files must be in 'S3Jobs' folder on USB drive.
To import a single job:
Insert USB
Select
drive in job to
terminal
import
To import all jobs:
Insert USB
drive in
terminal
Closing a Job
Paths and Boundaries
Setting an A=B Line
Apply can be on or off when setting an A=B line.
Vehicle at
start of
first pass
Setting an A + Direction Line
Apply can be on or off when setting an A + Direction line.
Vehicle at
start of
first pass
Enter
angle
Using a Previous A=B Line
Apply can be on or off when using a previous A=B line.
Vehicle at Select
start of A=B line
first pass from list
Creating an Initial Contour Pass
Vehicle at
start of
first pass
Setting a Pivot Line
Vehicle at
start of
first pass
Creating a Boundary
LEFT and INCLUDE buttons used to show path (options are
LEFT/RIGHT/CENTER and INCLUDE/EXCLUDE).
Vehicle at
start of
boundary
Adjusting Paths
Snapping the Guidance Line to the Current Location
In Straight guidance mode:
Shifting the Guidance Line
In Straight guidance mode:
In Pivot guidance mode:
Drive the
first pass
Other Tasks
Dropping a Marker
Making an eTurn
Apply Control Button
Press the Apply control button to toggle on and off
data logging or coverage data for the current job:
• On (orange button) indicates data logging
• Off (blue button) indicates no data logging
Drive
the
contour
Begin
driving
the circle
Drive
the
boundary
In Pivot guidance mode:
Outback STX™
Quick Reference Guide
Part Number: 875-0332-000 Rev A1
Starting STX
1. Power up the STX and any additional components connected
to STX.
2. Press Accept on the
warning screen. The
window at right
appears.
3. Press any of the Job
buttons to work with a
job or press Cancel
to start STX without a
job.
The first time you
start STX only the
New job and Cancel buttons are available. After you create a
job, the next time you start STX all four buttons are available.
STX must have GPS to begin a job and
provide guidance. The satellite indicator and
signal strength bars show if you have GPS
and the signal strength. If there is no GPS
signal, none of the job buttons on the above
window are available (they are all gray).