Advertisement
Standard Counter & Instrument Drive
RM600-RM1500
Horizontal
Counter Module
6.3 oz.
Magnet Housing
1.8 oz.
Thrust End
0.9 oz.
Temperature Compensated & Temperature Compensated Instrument Drive
Counter Module
Magnet Housing
Thrust End
*ECM2 Series and AdEM Series modules being electronic do not require oil.
Hardware Specification Table:
Meter Model
Flange/Gasket
(Full-Face)
1.5" NPT Threaded
RM600-RM1500
ANSI 125/150 2"
RM1000-RM1500
ANSI 125/150 2"
RM2000-RM3000
ANSI 125/150 3"
RM5000-RM7000
ANSI 125/150 4"
RM11000-RM23000
ANSI 125/150 6"
RM25000-RM56000
*All bolts should be installed with approved anti-seize grease and standard steel zinc plate flat washers.
______________________________________________________________________________________________________________
RM2000-RM5000
Vertical
Horizontal
6.3 oz.
6.3 oz.
1.8 oz.
2.3 oz.
2.1 oz.
0.9 oz.
Horizontal
Vertical
Horizontal
n/a
n/a
5.6 oz.
n/a
n/a
2.3 oz.
n/a
n/a
0.9 oz.
Bolts and washers (Steel, Zinc Plated or
PTFE Coated)
N/A
5/8" – 11 x 1.5" long Hex Head SAE Grade 5
5/8" – 11 x 1.75" long Hex Head SAE Grade 5
5/8" – 11 x 1.75" long Hex Head SAE Grade 5
5/8" – 11 x 1.75" long Hex Head SAE Grade 5
3/4" – 10 x 2.5" long Hex Head SAE Grade 5
Oil Table:
RM7000-RM23000
Vertical
Horizontal
Vertical
6.3 oz.
6.3 oz.
6.3 oz.
3.5 oz.
3.5 oz.
11.6 oz.
2.5 oz.
1.4 oz.
8.8 oz.
Vertical
Horizontal
Vertical
8.8 oz.
8.4 oz.
20.8 oz.
3.5 oz.
3.5 oz.
11.6 oz.
2.5 oz.
1.4 oz.
8.8 oz.
Tel: 800 955-4Gas ● 215 946-2200 Fax: 215 943-2984
90 Main Street ● PO Box 1605 ● Tullytown, PA. 19007
www.imacsystems.com ● sales@imacsystems.com
RM25000-RM56000
Horizontal
Vertical
6.3 oz.
6.3 oz.
10.5 oz.
32.4 oz.
10.5 oz.
38.2 oz.
Horizontal
Vertical
n/a
n/a
n/a
n/a
n/a
n/a
*To install in meter in a reversed flow
configuration, flow configuration
must be switched by factory*
Advertisement
