Installing The Driver Software - Leadingtouch TM-19 User Manual

Installing the Driver Software

Leadingtouch TouchSystems provides driver software that allows your touchmonitor to work with your
computer. Drivers are located on the enclosed CD-ROM for the following operating systems:
• Windows XP
• Windows 2000
• Windows Me
• Windows 98
• Windows 95
• Windows NT 4.0
Additional drivers and driver information for other operating systems are available on the
Leadingtouch web site at www.Leadingtouch.com.
Your Leadingtouch touchmonitor is plug-and-play compliant. Information on the video capabilities of
yourtouchmonitor is sent to your video display adapter when Windows starts. If Windows detects your
touchmonitor, follow the instructions on the screen to install a generic plug-and-play monitor.
Refer to the appropriate section for driver installation instructions.
Depending upon whether you connected the serial communication cable or the USB
communication cable, you should install only the serial driver or the USB driver.
1.1 Installing and Using Leadingtouch for Windows Serials
Leadingtouch is software, which contains drivers of the touch panel controllers for the
specified communication connectors, RS232, USB
Follow these steps to install Leadingtouch .
1. Put the Leadingtouch CD to CD-ROM.
2. Change directory to Win9598me OR Win2000_XP.
3. Double click the Setup.exe, then windows starts to run the installation program.
4. Just click [Next >] button to continue installation.
www.leadingtouch.com
/
8 27