Advertisement

Loc-Ex
01 | Loc 01**
®
Operating Instructions Development Kit
Connect CC Debugger to Loc-Ex
01/ Loc 01**
®
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Loc 01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ecom Loc 01

  • Page 1 Loc-Ex 01 | Loc 01** ® Operating Instructions Development Kit Connect CC Debugger to Loc-Ex 01/ Loc 01** ®...
  • Page 2 All documentation and available software for the Loc-Ex 01 / Loc 01 ** can be found as download (please use the link below): https://www.ecom-ex.com/Application_Engineering/public/Loc-Ex_01/ Additional languages can be downloaded from the relevant product page at www. ecom-ex.com.
  • Page 3: Installing Drivers

    1. Scope of delivery 1 x Loc 01 Development Board 1 x CC Debugger 1 x Mini USB Cable 1 x 10 pin flat cable with 2x5 1,27mm connector 1 x Converter Board 2,54mm- 1,27mm connector 2. Installing drivers The required USB drivers for the tool, are listed below: •...
  • Page 4 !Please use the Blue Giga / Silabs tools for firmware flashing because Blue Giga is using an own scripting language which is not fully compatible with TI´s C language. 3. How to connect the Debugger with the Development Board 1. Connect the Debugger with the Converter Board 2,54mm- 1,27mm connector. 2.
  • Page 5 When pressing on “Info” the BLE Chip will be detected and the message below will be shown: Press the “Browse” Button and choose the requested .bgproj file for the Firmware upgrade: Press “Update”: The upgrade procedure will start. After the update has been finished you will be informed if the update was successfull.
  • Page 6 USB drivers: If Windows will not find the drivers automatically during the installation of “BLE- Update.exe” additional USB drivers can be found here (please use link below): • https://www.ecom-ex.com/Application_Engineering/public/Loc-Ex_01/DEBUG- GER/USB%20driver/ BG Build file is missing: Possibility 1: The bgbuild.exe is part of the “BLE GUI software” and can be found following this guideline: •...
  • Page 8 GmbH in keiner Form, weder ganz noch teilweise vervielfältigt, weitergegeben, verbreitet oder gespeichert werden. Der Inhalt dieses Dokuments wird so präsentiert, wie er aktuell vorliegt. Die ecom instruments GmbH übernimmt weder ausdrücklich noch stillschweigend irgendeine Gewährleistung für die Richtigkeit oder Vollständigkeit des Inhalts dieses Dokuments, einschließlich, aber nicht beschränkt auf die stillschweigende Garantie...

This manual is also suitable for:

Loc-ex 01

Table of Contents