Del Mar Tide Watch User Manual

DEL
Emtech La Costa Co.
MAR
www.delmarwatches.com
Tide Watch User Manual
calibre: ISA 8272
DEL
Emtech La Costa Co.
MAR
www.delmarwatches.com
Tide Watch User Manual
Tide amplitude and Moon phase counter
calibre: ISA 8272
Hour hand
Tide cycle counter
DEL
Emtech La Costa Co.
Tide cycle hand
MAR
www.delmarwatches.com
Tide Watch User Manual
Tide amplitude and Moon phase counter
calibre: ISA 8272

SETTING THE TIME AND THE DATE

CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
Hour hand
Tide cycle counter
1 2 3
DEL
Emtech La Costa Co.
Tide cycle hand
MAR
www.delmarwatches.com
** After setting time, alway screw
back the crown by hand tightly
to keep the watch water resistant.
Tide Watch User Manual
Tide amplitude and Moon phase counter
calibre: ISA 8272
SETTING THE TIME AND THE DATE
CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
Hour hand
push button
SETTING THE TIDE AMPLITUDE (MOON PHASES) - COUNTER AT 10 O'CLOCK
The tide amplitude counter performs one revolution
Tide cycle counter
1 2 3
in 29 days 12 hours and 44 minutes.
DEL
push button A
Emtech La Costa Co.
Tide cycle hand
1 ) Press button A for 3 seconds , release when `beep` ,
MAR
now you are enter the MOON PHASES setting mode
www.delmarwatches.com
** After setting time, alway screw
2 ) Press A again to set the tide amplitude corresponding
back the crown by hand tightly
to the moon phase.
to keep the watch water resistant.
* Continuous pressing on A enables rapid setting to be
Tide Watch User Manual
performed.
Tide amplitude and Moon phase counter
* After 3 seconds without pressing on A, a beep indicates
calibre: ISA 8272
exit from setting mode.
Comment :
SETTING THE TIME AND THE DATE
The moon phases hand will start with its setting time,
CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
jumps step forward every 24 hours.
Hour hand
Battery Life
Noti cation
Small second hand
Minute hand
A
Pushbutton :
Tide amplitude and Moon phase setting
Crown
1 2 3
Battery Life
Noti cation
B
Pushbutton :
Tide cycle setting
Date window
Small second hand
Minute hand
A
Pushbutton :
Tide amplitude and Moon phase setting
Time setting
Crown
1 ) Unscrew and pull crown out to Position 3.
1 2 3
Battery Life
Noti cation
2 ) Turn the crown to set the correct time.
B
*if hour hand passed 12:00 and date change
Pushbutton :
Tide cycle setting
it is midnight 12:00 am, otherwise it is noon
12:00 pm.
3 ) Push crown back to Position 1 and screw in.
Date window
Date setting
1 ) Unscrew and pull the crown out
to position 2.
Small second hand
2 ) Turn the crown clockwise to set the date .
Minute hand
3 ) Push crown back to Position 1 and screw in.
A
Pushbutton :
Tide amplitude and Moon phase setting
Time setting
Crown
1 ) Unscrew and pull crown out to Position 3.
1 2 3
Battery Life
Noti cation
2 ) Turn the crown to set the correct time.
B
*if hour hand passed 12:00 and date change
Pushbutton :
Tide cycle setting
it is midnight 12:00 am, otherwise it is noon
12:00 pm.
3 ) Push crown back to Position 1 and screw in.
Date window
Date setting
1 ) Unscrew and pull the crown out
to position 2.
Small second hand
2 ) Turn the crown clockwise to set the date .
Minute hand
3 ) Push crown back to Position 1 and screw in.
A
Pushbutton :
Tide amplitude and Moon phase setting
Time setting
Crown
1 ) Unscrew and pull crown out to Position 3.
1 2 3
Battery Life
Noti cation

SETTING THE TIDE FUNCTION - central hand

push button
P. 1
SETTING THE TIDE FUNCTION - central hand
Note for Del Mar Tide Watch
The Del Mar Tide Watch approximates the tides based
push button
Local tides can vary from the levels indicated on the
display especially in certain portions of the West Coast
of Florida that don't have two tides per day.
For customer guidance in Tide predictions,
we recommend using this updated web site:
SETTING THE TIDE FUNCTION - central hand
http://www.tidesandcurrents.noaa.gov/curr_pred.html
The Del Mar Tide watch should never be used for navigation.
P. 2
Note for Del Mar Tide Watch
The Del Mar Tide Watch approximates the tides based
push button
• When the watch is under water or wet, never use the pushers/bezels, or set
Local tides can vary from the levels indicated on the
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
display especially in certain portions of the West Coast
water after being in salt water.
of Florida that don't have two tides per day.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
For customer guidance in Tide predictions,
together and such a change could cause damage.
we recommend using this updated web site:
• No hot tub/sauna. Please do not take your Del Mar watch into the Hot Tub or
SETTING THE TIDE FUNCTION - central hand
Sauna. The combination of extreme heat and water may cause your watch to
http://www.tidesandcurrents.noaa.gov/curr_pred.html
lose some of its water resistance.
The Del Mar Tide watch should never be used for navigation.
Indication
Depth
200 meters/650 feet
Note for Del Mar Tide Watch
500 meters/1650 feet
1000 meters/3300 feet
P. 3
The Del Mar Tide Watch approximates the tides based
push button
• When the watch is under water or wet, never use the pushers/bezels, or set
Local tides can vary from the levels indicated on the
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
display especially in certain portions of the West Coast
water after being in salt water.
of Florida that don't have two tides per day.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
For customer guidance in Tide predictions,
together and such a change could cause damage.

Characteristics :

we recommend using this updated web site:
• No hot tub/sauna. Please do not take your Del Mar watch into the Hot Tub or
Tide analogical / electronic movement. Rotating stepping motors.
SETTING THE TIDE FUNCTION - central hand
Date, quick date correction.
Sauna. The combination of extreme heat and water may cause your watch to
http://www.tidesandcurrents.noaa.gov/curr_pred.html
Small second, 1 step per second.
lose some of its water resistance.
Noti cation end of battery life (EOL): indication by small second hand at 2:00
The Del Mar Tide watch should never be used for navigation.
Indication
Indication of the tide state, semi-diurnal.
Depth
Tide : The center sweep hand makes 1 revolution in 12 hours 25 minutes 14 seconds.
200 meters/650 feet
Tide amplitude: The small counter hand makes 1 revolution in 29 days 12 hours 44
Note for Del Mar Tide Watch
500 meters/1650 feet
minutes.
1000 meters/3300 feet
Movement : SWISS MADE ISA 8272
Operating temperature : 0 °C --- 50 °C
The Del Mar Tide Watch approximates the tides based
Accuracy : ± 0.5 sec/day/25 °C
push button
Battery : SR927SW / 395
• When the watch is under water or wet, never use the pushers/bezels, or set
Battery life : approx. 39 months
Local tides can vary from the levels indicated on the
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
display especially in certain portions of the West Coast
P. 4 water after being in salt water.
of Florida that don't have two tides per day.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
1 ) Press button B for 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press B again to set the state of the local tide.
* Continuous pressing on B enables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
B
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
1 ) Press button B for 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press B again to set the state of the local tide.
* Continuous pressing on B enables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
B
on average intervals and lunar cycles.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
1 ) Press button B for 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press B again to set the state of the local tide.
* Continuous pressing on B enables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
B
on average intervals and lunar cycles.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
1 ) Press button B for 3 seconds , release when `beep` ,

Water related use

now you enter the tide setting mode
Caseback Scuba Water resistant
2 ) Press B again to set the state of the local tide.
marking Diving characteristics
Suitable for normal
200m
* Continuous pressing on B enables rapid setting to be YES
Scuba Diving
500m YES
Suitable for Deep Diving
performed.
1000m YES Suitable for Deep Diving
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
B
on average intervals and lunar cycles.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
1 ) Press button B for 3 seconds , release when `beep` ,
Water related use
now you enter the tide setting mode
jumping 4 successive steps every 4 seconds.
Caseback Scuba Water resistant
2 ) Press B again to set the state of the local tide.
marking Diving characteristics
Suitable for normal
200m
* Continuous pressing on B enables rapid setting to be YES
Scuba Diving
500m YES
Suitable for Deep Diving
performed.
1000m YES Suitable for Deep Diving
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
B
on average intervals and lunar cycles.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
P. 5
P. 6
P. 7

SERVICE

Emtech La Costa Co.
Del Mar service dept.
1320 State Rt 9 #26
Champlain, NY 12919
P. 8