Advertisement
Quick Links
1. Names and Parts
3
1.Power On/Off
2
4
2.Earphone Port
5
6 7
3.Microphone
4.Line In
5.Rec LED (Red)
8
1
6.Charge LED (Green)
9
7.Power On LED (Blue)
10
8.Rec / Delete
9.Play / Pause
11
10.Volume Up / Forward
16
12
11.Volume Down / Backward
12.Vibration Switch
13.USB Cover
14.VOX On/Off
13
15.USB / Charge Port
16.Voice Activated Sensitivity
14
15
※VOX : Voice Operated Switch
(1)
6. Landline Telephone Conversation Recording
(1)
Line
Line
1.Disconnect landline from telephone (1),
(3)
(2)
then connect it to the LINE port on the
supplied landline splitter box (2).
2.Connect RJ11 cable to the TEL port on the
(4)
splitter box.Then connect the other end of
the cable to the telephone (3).
3. Connect the phone jack cable to the Line In
(10)
(8)
(7)
(9)
port on AR-200 and the other end to the
audio output port on splitter box (4).
4.To activate VOX mode, slide the switch (5)
to "On" and slide sensitivity to L (6).
(6)
(5)
5.Power on the device (7) and the blue LED
turns on (8).
6.Press the Rec buuton (9) and the red LED
turns on (8).
2. Package Content
USB
Earphone
Earphone Microphobe
Landline Splitter Box
RJ11 Cable (1)
RJ11 Cable (2)
Phone Jack Cable (3)
3. Charging the Battery
1. Open the USB cover
1
2. With the unit powered off, connect the
4
supplied USB cable to the USB port on
the base of the device.
2
3.Connect the other end of the USB cable
to a computer.
3
4. The green LED
turns on during charging.
4
2
5. To fully charged the device, it takes
1
about 3-4 hours. When the battery is fully
charged, the green LED turns off.
3
(2)
7. Playback Recordings
1. To playback the recorded files, you can connect the supplied
earphone (A) or connect the device to PC (B).
2. Power on the device (1) then press the Play button (2).
3. Press and hold the volume up/down button (3) to adjust the volume.
4. To forward or backward, short press the volume button up/down
button (3).
(A)
(1)
(B)
(2)
(3)
(6)
4. Continuous Recording & Voice Activation Recording(VOX)
8
12
13
14
7
3
5
1
16
◆ Continuous Recording
1. Press and hold the power on button
for 3 seconds then the blue LED
1
turns on. After 7 seconds, the blue LED blinks 3 times. The device is on
standby mode.
2. Press Rec button.
The red LED
turns on when recording. To activate
8
5
vibration mode, slide the switch to ON.
(The vibration mode is suggested
12
for discreet recordings.)
3. To stop recording, press again Rec button and the red LED turns off.
4. When battery is fully charged, a continuous recording time is about 28 hours.
◆ Voice Activation Recording(VOX)
1. Open the USB cover
and slide the voice activation switch
to ON. Then
13
14
select the voice activition sensitivity.
(It is suggested Low sensitivity for
16
distance within 2 to 3 meters)
2. Follow the continuous recording steps to start recording.
3. VOX recording time is about 80 hours.
(3)
(7)
5. Microphone Recording(Cellphone Conversation Recording)
6
2
3
1
7
4
5
1. Connect the supplied microphone
to Line In port.
1
6
Refer to illustration above, place the microphone to your ear first.
2. When answering incoming calls, place the cellphone
3
3. Power on the device
and press the Rec button.
4
5
(4)
AR-200
Mini Audio Recorder
Landline & Cellphone Recorder
Quick Guide
Law Enforcement Products Manufacturer
LawMate
on top of the mic.
2
V1.0
Advertisement
