IBASE Technology IB908F User Manual page 41

BIOS SETUP
USB Configuration
Advanced
Main
USB Configuration
USB Module Version
USB Devices:
1 Keyboard, 1 Mouse
Legacy USB Support
USB3.0 Support
XHCI Hand-off
EHCI Hand-off
USB hardware delays and time-outs:
USB Transfer time-out
Device reset tine-out
Device power-up delay
Legacy USB Support
Enables Legacy USB support.
AUTO option disables legacy support if no USB devices are connected.
DISABLE option keeps USB devices available only for EFI applications.
USB3.0 Support
Enable/Disable USB3.0 (XHCI) Controller support.
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by XHCI driver.
EHCI Hand-off
Enabled/Disabled. This is a workaround for OSes without EHCI hand-off
support. The EHCI ownership change should be claimed by EHCI driver.
USB Transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.
36
Aptio Setup Utility
Chipset Boot
8.10.27
Enabled
Enabled
Enabled
Enabled
20 sec
20 sec
Auto
IB908F User's Manual
Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
ESC: Exit