Download Print this page

Watchman 9-90 Owner's Manual

Catalyst monitor with programmed audio signals, fahrenheit temperature display for catalytic wood-burning stoves & fireplaces

Advertisement

Quick Links

Watchman
Model #9-90
Owner's Manual
Quality Manufactured
Catalyst monitor with programmed audio signals
Models 9-90 and 9-90AC Fahrenheit temperature display
for catalytic wood-burning stoves & fireplaces
in North Carolina
Condar Company • 111 Kangaroo Drive • Columbus, North Carolina 28722 • 828.436.2102 •Condar.com

Advertisement

loading

Summary of Contents for Watchman 9-90

  • Page 1 Owner’s Manual Quality Manufactured Catalyst monitor with programmed audio signals Models 9-90 and 9-90AC Fahrenheit temperature display for catalytic wood-burning stoves & fireplaces in North Carolina Condar Company • 111 Kangaroo Drive • Columbus, North Carolina 28722 • 828.436.2102 •Condar.com...
  • Page 2 1. Consult manufacturer’s manuals 3. Where to locate the electronic monitor When installing a Condar Watchman™ with any wood- The 6-foot thermocouple cable allows you to locate burning stove or fireplace, first consult manufacturer’s Watchman monitor well away from stove or fireplace.
  • Page 3 Probe diameter: ¼ inch Maximum probe temperature rating: 1950 degrees Excessive temperatures and long-term use will wear out the high-temperature probe. If your batteries (9-90) are fresh but the monitor begins to operate erratically, you are probably due for a new cable-probe assembly.
  • Page 4 Efficient and safe fires are between 700 and 1350 degrees. Esthetics and heat desired from your fire determine where you want to be. Watchman informs you when your catalyst is getting hotter than necessary and is approaching overheating temperature at 1400 degrees. Many users discover they can burn wood longer, still achieving a pretty fire, by adjusting draft to bring temperatures down.
  • Page 5 AUDIO SIGNAL button: During normal operations it isn’t necessary to press the AUDIO SIGNAL button. An illuminated dot in the lower right corner of Temperature Display area (pointed to by the graphic around AUDIO SIGNAL button) affirms you’re in programmed audio mode to generate beep codes automatically. Beep codes are generated by a piezo type audio component in the monitor.
  • Page 6 To learn more about replacing catalytic combustors visit WoodstoveCombustors.com/replacement.html Condar Watchman product warranties Thermocouple cable-probe assemblies are warranted by Condar Company for thirty days from installation, when not subjected to temperatures exceeding 1950 degrees Fahrenheit.

This manual is also suitable for:

9-90ac