Kaco Powador-proLOG Operating Instructions Manual page 46

Secti o n 10 · Upd ate
ACTION
–
Copy the unzipped fi les to the CF card. It is recommen-
ded that you save the "data" folder from your backup
copy onto the CF card. This will ensure that you have all
the daily fi les on the Powador-proLOG.
–
Open the fi le "anlage.ini" (which you can fi nd in path
"ISTCONF\ANLAGE") and enter the serial number of
your data logger.
Operating Instructions Powador-proLOG_EN
ACTION
–
Insert the CF card again (with the KACO new energy
logo at the top) and switch on the unit. The start pro-
cess is complete when the status LED starts to fl ash.
The new software is installed.
–
Now run the installation wizard in order to reconfi gure
the data logger.
Page 47