Advertisement
Proper Ways of Using
Press the button
be ready to work.
Set the time of massage
After starting the massage-chair. press the time-selecting button
time setting. Three alternatives are available; they are 5-minute.10-minute
and 15-minute. From the display you can see the set working time.
Automatic massage program
When automatic massage is preferred, press the button
massage-chair will be ready to massage automatically. Under this condition,
the massage equipment will knead the back and the leg automatically
according to the computer program complemented inside.
1.
Select kneading st le
Press the button
Usually the implicit route of the massage-chair is
select different kneading scopes using the button
move the massage equipment to locate the knea
button
2. Select swavina stvle
Press the button
Usually the impli
select different swaying scopes using the button
move t
button
3. Select finger-pressing style
Press the button
back with finger-pressing. Usually the implicit route of the massage-chair
is the whole body. Different finger-pressing scopes can be selected through
the button
4. Select the speed of massage
When the massage-chair is at
adjusted by pressing the button
From the display, you can see different rates selection from L1 to L3. And
different massage rate can be selected as needed.
on the telecontrol panel of the massage-chair, and it will
and the massage-chair begins to knead the back.
and
and the massage-chair begins to sway the back.
of the massage-chair is
ent to locate the swa
and
, and the massage-chair begins to massage the
rate of kneading or swinging can be
.
Three alternative rates are available.
, and the
, or you can also
Advertisement
