Summary of Contents for Efco 135
- Page 1 Operating Instructions for Kiln 99 500 31 efco 135 Version: 09 / 2011 Translation of Original Operating Instructions...
-
Page 2: Table Of Contents
Please read these instructions before you unpack the kiln. Table of contents: Items delivered with the kiln Range of application Specifications Caution Personal protective equipment Unpacking and handling Installing and connecting to electricity Putting the kiln into service Operation 10. Care and maintenance 11. -
Page 3: Items Delivered With The Kiln
1. Items delivered with the kiln: Kiln without a temperature control device. 2. Range of application: The kiln is suited for all firing techniques for firing temperatures from 400 °C to 1100 °C, e.g. for firing glass, enamels and ceramics, as well as for annealing and hardening of metals and tools. -
Page 4: Unpacking And Handling
6. Unpacking and handling: When unpacking or transporting the kiln, always hold the lower side of the kiln to lift it. Never lift the kiln by holding the door, cable or the mains connector. Before putting the kiln into service, remove all packaging material from the kiln, the door and the firing chamber. -
Page 5: 10. Care And Maintenance
10. Care and maintenance: Deposits of black soot may arise inside the firing chamber. Remove these deposits when neces- sary by operating the empty kiln at the maximum temperature for 45 minutes in order to burn the soot away from the heating elements and the insulation. The outside of the kiln may be cleaned with a damp cloth, when the kiln has cooled down. -
Page 6: 13. Further Safety Information
13. Further safety information: It is only possible to work safely with the kiln, if you read the operating instructions and the safety information completely, and strictly fol low the advice given. Before using the kiln, inform any involved persons in detail of these safety instructions. Keep the safety information in a safe place, i.e.