Advertisement
Quick Links
Advertisement
Summary of Contents for Ibis Tek 7013-310-036429
-
Page 2: Components List
ISV – Tahoe – Cargo Barrier Installation Manual V112414 Components List www.ibissv.com 724-431-2080 F: 724-431-4361... -
Page 3: Installation Instructions
ISV – Tahoe – Cargo Barrier Installation Manual V112414 Installation Instructions 1. Lay down the back seat. 2. Place Cargo Barrier into the back of the vehicle and prop it up to keep it from falling. 3. Locate the driver and passenger side factory threaded floor mounting holes located directly behind the seats and under the floor mat rubber roughly 6 ½”... - Page 4 ISV – Tahoe – Cargo Barrier Installation Manual V112414 4. Install the both the driver and Passenger side lower Cargo Barrier mounting brackets: a. Align both of the lower mounting bracket hole with the threaded floor mounting hole and hand tighten the provided 10MM bolts and 10MM flat washers.
- Page 5 ISV – Tahoe – Cargo Barrier Installation Manual V112414 6. Install the passenger side Upper Support Strap: a. Loosely attach the passenger side Upper Support Strap to the top of the Cargo Barrier using 2 each of the 1/4-20 x 3/4" HHCS, and 1/4-20 Flanged Serrated Nuts.
-
Page 6: Installation Complete
ISV – Tahoe – Cargo Barrier Installation Manual V112414 8. Install the top Polycarbonate Window: a. Remove and save the top 5 bolts located on the Cargo Barrier. b. Align the top Polycarbonate Window with the 5 holes and reattach the 5 removed carriage bolts and 1/4-20 flanged serrated nuts.