1. Manuals
  2. Brands
  3. Drolo Manuals
  4. Mixer
  5. Twin Peaks Tremolo V4
  6. Manual

Drolo Twin Peaks Tremolo V4 Manual

Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
Twin Peaks Tremolo V4
drolo

Connecting and powering:

The power supply needs to be 9V/100ma center negative like the common BOSS power supplies:
Make sure the polarity of your power supply is correct or it will damage the pedal. D
o NOT run at higher voltages.
Since the pedal has a digital microprocessor operating with high frequencies, you might hear some high
pitched noise if you use it together on the same power supply with other pedals (daisy chained) even when it
is off. The noise can bleed through the power supply into the other pedal's signal. This is normal for such
devices. It might not be the case in your particular setup but if you notice that, I would suggest using an
isolated power supply for the tremolo.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Twin Peaks Tremolo V4 and is the answer not in the manual?

Questions and answers

Summary of Contents for Drolo Twin Peaks Tremolo V4

  • Page 1 Twin Peaks Tremolo V4 drolo Connecting and powering: The power supply needs to be 9V/100ma center negative like the common BOSS power supplies: Make sure the polarity of your power supply is correct or it will damage the pedal. D o NOT run at higher voltages.
  • Page 2 Controls:...
  • Page 3 Bypass: The pedal uses a relay bypass. If you give it a short tap (<1sec) it acts in latching mode. If you press it for more than a second the bypass indicator led will start flashing and you are in momentary mode.
  • Page 4 EXP input: Can be used to externally control the rate. When an expression pedal is connected, the rate pot can be used to define the max setting of the expression pedal. Most commercially available expression pedals based on a potentiometer and using a TRS plug should work.
  • Page 5 Notes about the pedal: As with any tremolo pedal, if you are after choppy on/off action, you will get better results placing it after dirt pedals, although it does a pretty good job in front of them too. Given the filtering nature of the harmonic mode, you might find that it sounds more natural and less dramatic before dirt.

Table of Contents