Description / Specifi Cations - LCN 8310-877 User Manual

1 Description / Specifi cations
This switch (8310-805C) is a hermetically sealed (polyurethane
potted compound) reed switch. The housing 'Wings' fl ex to
hold the sensor securely in place thus allowing for 'ease of
installation' and added protection from swelling wood.
DESCRIPTION
VOLTAGE MAX.
CURRENT MAX.
POWER MAX.
ELECTRICAL
CONFIGURATION
WIRING:
(12" 22AWG)
GAP DISTANCE MAX.
2 Precautions
Shut off all power before attempting any wiring procedures.
Maintain a clean & safe environment when working in public areas.
Constantly be aware of pedestrian traffi c around the area.
Always stop pedestrian traffi c through the doorway when performing tests that may result in unexpected reactions by the door.
ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge. Before handling any board
ensure you dissipate your body's charge.
Always check placement of all wiring before powering up to insure that moving door parts will not catch any wires and cause
damage to equipment.
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10/19) upon completion of installation.
DO NOT attempt any internal repair of the Piezo Button. All repairs and/or component replacements must be performed by
LCN. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty.
3 Installation
1. Drill a 3/8" dia. x 1" deep hole for the contact and
a 3/8" dia. x 1 5/16" deep hole for the magnet.
NOTE: 'Wings' on contact allow for expansion
if hole is slilghtly oversized (See
Dimensions to the right).
2. Press the magnet into the door and the contact
into door frame.
3. Connect the NO, NC & COM from the contact to
applicable circuit.
4 Company Contact
Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please
contact LCN at 1-800-526-2400. If you must wait for the following workday to call LCN, leave the door inoperable until
satisfactory repairs can be made. Never sacrifi ce the safe operation of the automatic door or gate for an incomplete
solution.
For more information, visit www.lcn.ingersollrand.com.
75.5309.00 20070213
8310-805C
SPECIFICATION
30 VAC/VDC
0.25 A
3.0 W
SPDT
NO: Red
NC: White
COM: Black
1/2 INCH
0.275"
7.0 mm
DOOR POSITION SWITCH
MAGNETIC CONTACT SWITCH
1.00"
25.6 mm
0.425"
10.9 mm
NOTE: Wings compress to .375" dia.
USER'S GUIDE
0.60" 1.313"
15.4 mm 33.3 mm
0.375"
9.6 mm
Page 1 of 1