Related Manuals for Rimikon RIM-IPC2
Summary of Contents for Rimikon RIM-IPC2
- Page 1 P a g e www.Rimikon.com Product Manual Rimikon IP CONTROLLER Model No: RIM-IPC2 / RIM-RGBIPC V.02 1275 Leeds Ave, Suite 800 Ottawa Ontario, Canada K1B 3W2 -877-470-7480...
- Page 2 P a g e Product Description The Rimikon IP Controller is designed to work with all of Rimikon’s Low Voltage LED Lighting products. Along with its accompanying app, available for both Apple and Android Devices, it allows you to control single color (RIM-IPC2) or RGB color (RIM- RGBIPC) or multiple lighting loads conveniently from the palm of your hand.
- Page 3 90 seconds for the IP controller to fully boot up. Software Installation Apple IOS Open the App Store on your device, search for Rimikon. Download and install the Rimikon App. Android Open the Play Store, search for Rimikon. Download and install the Rimikon App.
- Page 4 “LEDnetXXXXXXXX” (the x’s are the IP controllers MAC Address.) (Figure 2) 2. Connect to that network using the default password “88888888”. 3. Open the Rimikon App, there you will see the same LEDnetXXXXXXXX listed as an available device. (Figure 3) Press and hold it for 3 seconds to edit it.
- Page 5 “LEDnetXXXXXXXX” (the x’s are the IP controllers MAC Address.) (Figure 2) 2. Connect to that network using the default password “88888888”. 3. Open the Rimikon App, there you will see the same LEDnetXXXXXXXX listed as an available device. (Figure 3) Press and hold it for 3 seconds to edit it.
- Page 6 Remarks: P a g e The Device IP is: 192.168.10.1 and default password 88888888. You can change your password in the settings. For WIFI mode, change the SSID to match with your Router ( the default setting) For Ethernet mode, make sure to uncheck the Follow Wireless Router SSID on the properties page.
Need help?
Do you have a question about the RIM-IPC2 and is the answer not in the manual?
Questions and answers