Turn Off The Ups; Audible Alarm Mute Function - PowerWalker VFI 1000 TG User Manual

5.6 Turn off the UPS:

(1) In Line Mode:
Press OFF button continuously for more than 1 second to turn off
the UPS, the UPS will get into no output or bypass mode. In
circumstance, the UPS might have output power if bypass mode is
enabled. Disconnect the mains power to turn off the output.
(2) In Battery Mode:
Press OFF button continuously for more than 1 second to turn off
the UPS, the UPS will get into no output or standby mode. After 10s
UPS will be shut down completely.

5.7 Audible alarm mute function:

If the audio alarm is too annoying in battery mode, the audio alarm is
able to mute by press ON button continuously for more than 1 second.
Moreover, the audio alarm will be active again when the battery
reaches low status for reminding that UPS output power will shut down
soon.
If the audio alarm is too annoying in bypass mode, the audio alarm is
able to mute by press OFF button continuously for more than 1 second.
This action doesn't affect the warning and fault alarm.
In any mode, if the warning or fault alarm is too annoying, you can mute
it by press ON button less than 0.5 second, and enable it by press ON
button less than 0.5 second again. If the new warning or fault alarm is
appeared, the buzzer will beep again.
Alarm Table List
-17-