ENFORCER Bug Zapper BZ30 Instructions

Maintenance
Regular maintenance of your appliance will keep it safe and in proper working order.
1. Before cleaning.
When not in use or before cleaning, always disconnect the appliance from the mains
supply.
2. Cleaning.
Remove dead insects from the appliance once per week with the brush supplied. Gently
brush dead insects from grill. Do not use metal objects or stick fingers through safety
screen. Gently shake dead insects from appliance and discard. Regularly clean the
outside of the appliance with a soft cloth and dry it with a dry towel. Do not immerse in
water. Do not use harsh solvents to clean the plastic.
3. Ventilation safety slots.
Always keep the ventilation safety slots on the front and rear of the appliance clear from
blockage. Failure to keep these vents clear may result in overheating.
4. Damage check.
Always check that the appliance is in good working condition and all guards are secure.
Check the power supply cord and plug regularly for damage.
Lamp Replacement
IMPORTANT: Before replacing lamp, unplug unit from mains power and wait one minute.
1. Using a Philips Head screwdriver, remove two screws from lamp cover on the
bottom of unit (Fig 1.) and gently remove lamp cover.
2. Gently twist plastic lamp grip anti-clockwise to unscrew and remove lamp (Fig 2).
3. Remove and replace the lamp using spare lamp BZ30G.
4. Reposition lamp cover, insert and tighten screws.
Fig 1. Lamp Cover Screws
4 Secombe Place Moorebank NSW 2170
Tel 1300 360 211. Fax 1300 360 484
Fig 2. Lamp with lamp grip
Model: BZ30
This appliance is weatherproof and can be left outdoors
READ AND SAVE THESE INSTRUCTIONS
Rev May 2014
Carefully read this manual before using the Enforcer Bug Zapper. Make sure that
you know how to operate the appliance. Maintain the appliance in accordance
with the instructions to ensure that it functions properly. If the appliance is to be
used by a third party, this instruction manual must be supplied. No liability can be
accepted for any damage caused by non-compliance with these instructions or
any other improper use or mishandling.