Quick
Installation Guide
300Mbps Wireless N Mini Router
MODEL NO. TL-WR810N
During Travel
Standard Wireless Router
Internet
C
Hotspot Router
Public Hotspot
Determine Operation Mode
Scenario
Operation Mode
Standard Wireless Router
Travel
Hotspot Router
Repeater
Client
Home
Access Point
A
30
0M
bp
s TL
-W
R 81
0N
B
LAN/WAN
LAN
30
0M
bp
s TL
-W
R 81
0N
Application
To share a wired (Ethernet) connection to wireless devices, when in a hotel room, small office, etc.
To create your personal hotspot from a public Wi-Fi network when in a hotel room, on a trade show, etc.
To extend the range of an existing Wi-Fi network.
To function as a wireless adapter to connect your wired device (e.g. Blu-ray® players, smart TVs, or game
consoles) to a Wi-Fi network.
To transform an existing wired (Ethernet) network to a wireless one
1
Connect the hardware according to step A to C in the left diagram.
2
Connect your device to the router wirelessly or via an Ethernet cable. The
Wi-Fi network name and password are on the router's label.
3
Launch a web browser and type http://tplinkwifi.net in the address bar.
Enter admin (in lowercase) for both username and password to log in.
4
Click Next to start the Quick Setup. Select Standard Wireless Router mode
and click Next.
5
Select the WAN Connection Type and follow the screen instructions. When
using the router in a hotel room or a small office, select Dynamic IP.
Note: If the router is successfully connected to the Internet, this step will be skipped.
OR
6
On the Wireless page, either customize your Wireless Network Name and
Wireless Password or keep the default ones , and then click Next.
7
Click Finish to complete the configuration.
1
Plug the router into an electrical outlet within the range of the public
hotspot.
2
Connect your device to the router wirelessly or via an Ethernet cable. The
Wi-Fi network name and password are on the router's label.
3
Launch a web browser and type http://tplinkwifi.net in the address bar.
Enter admin (in lowercase) for both username and password.
4
Click Next to start the Quick Setup. Select Hotspot Router mode and click
Next.
5
Select the WAN Connection Type and follow the screen instructions. When
using the router in a hotel room or a small office, select Dynamic IP.
6
On the Wireless page, click Survey to find your public Wi-Fi network and
click Connect. Enter the public Wi-Fi password in the Password field.
In the AP Setting section, either customize your Local SSID and Wireless
Password or keep the default ones, and then click Next.
7
Click Reboot to complete the configuration.