Banner B630 Operating Instructions & Parts Manual

Garage jack with 3" casters capacity 3 ton

Advertisement

Quick Links

Operating Instructions & Parts Manual
Model Number
B630
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
SFA Companies, Inc.
10939 N. Pomona Ave.
Kansas City, MO 64153
Tel (888) 332-6419, Fax (816) 891-6599
sales@blackhawk-automotive.com
© Aug. 2017
Garage Jack
WARNING
!
To avoid crushing and related injuries:
NEVER work on, under or around a
load supported only by a hydraulic
jack. ALWAYS use a pair of adequately
rated jack stands.
with 3" Casters
Capacity
3 Ton
B630JS-M0_082017
Printed in China

Advertisement

Table of Contents
loading

Summary of Contents for Banner B630

  • Page 1 Operating Instructions & Parts Manual Model Number Capacity B630 3 Ton This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 2: Safety And General Information

    WARNING: Do not use hydraulic jack as stand-alone device. After lifting, immediately support the lifted vehicle with a pair of appropriately rated jack stands. SPECIFICATIONS Model Capacity Min. Height Max. Height B630 3 Ton 5-1/2" 18-1/2" WARNING WARNING • Study, understand, and follow all instructions before operating this device.
  • Page 3 PREPARATION WARNING: Do not lift or carry jack by handle. Handle could dislodge and jack fall, resulting in possible injury or property damage. Before Use 1. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use.
  • Page 4: Operation

    OPERATION Lifting 1. Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the vehicle's emergency brake and chock the unlifted wheels in both directions to prevent inadvertent movement. 2. Close the release valve by turning the pump handle clockwise until firm resistance is felt. 3.
  • Page 5: Troubleshooting

    TROUBLESHOOTING Symptom Possible Causes Corrective Action • Release valve not tightly closed • Check release valve closed Jack will not lift load • Load is too heavy • Consider higher capacity jack • Release valve not tightly closed • Check release valve closed Jack will lift, but not maintain •...
  • Page 6: Replacement Parts

    B630-2 Rear Caster Assembly B630-3 Saddle B630-4 Oil Filler Plug B630-5 Handle B630-6 Return Spring, Handle Sleeve B630-7 Bolt B630-8 Handle Sleeve B630-9 Hydraulic Unit B630-10 Seal Kit Label(s) Owner’s Manual Figure 2 - Replacement Parts Illustration for Model B630...
  • Page 7 SFA Companies, Inc. 10939 N. Pomona Ave., Kansas City, MO 64153 Tel (888) 332-6419, Fax (816) 891-6599 sales@blackhawk-automotive.com...
  • Page 8 SFA Companies, Inc. 10939 N. Pomona Ave., Kansas City, MO 64153 Tel (888) 332-6419, Fax (816) 891-6599 sales@blackhawk-automotive.com...

Table of Contents