Amped Wireless PCI20E Setup Manual

SETUP GUIDE
High Power AC1200 Wi-Fi PCI-E Adapter
1
Install Adapter
2
Insert the Setup CD
3
Follow the Instructions for your Operating System
3
Windows 8, 7, and Vista
A. From the Menu page, select
If the Menu page does not appear, browse the
CD drive and double-click the
C. Restart your Computer
A prompt will appear asking you to restart your
computer. Select Yes
E. Connect to a Wireless Network
If your network has security enabled, you can
enter it in the Network Key
Windows XP
A. From the Menu page, select
If the Menu page does not appear, browse the
CD drive and double-click the
C. Restart your Computer
After the driver installation, a prompt will
appear asking you to restart your computer.
Select Yes and click
E. Connect to a Wireless Network
If your network has security enabled, you can
enter it in the Network Key
Install Software
Autoload.exe file.
and click Finish to restart.
field and click OK.
Install Software
Autoload.exe file.
Finish to restart.
field and click OK.
?
Got Questions?
Phone: 888-573-8820
Email: techsupport@ampedwireless.com
Web: www.ampedwireless.com/support
Install the Adapter
Power off your PC and open the case to find an
available PCI-E slot.
Insert the Adapter into the available PCI-E slot
and close the lid.
Attach the Antennas
Locate the Antenna Stand and fasten the two
antennas onto the antenna connectors.
Attach the antenna cable to the antenna connectors
on the Adapter (located on the back of your PC).
If you choose not to use the antenna stand, you
may also attach the antennas directly to the ant-
enna connectors on the Adapter.
Power on your Desktop PC
a
Insert the Setup CD
b
Note: Windows XP Users
A Found New Hardware Wizard
when your PC has powered on. Click
the window and continue with the installation in Step 3
below.
B. Start the Driver/Utility Installation
If prompted, click Yes
D. Locate a Wireless Network
Amped Wireless
Utility
Once Windows has completed the software
installation, locate the
your desktop and open the software by double-
clicking the icon. Select the
to view nearby networks.
Highlight the network that you wish to connect to
and double-click it to connect or click,
Profile, to have your computer connect automat-
ically when the network is available.
B. Software Installation
If you are prompted by a Windows Logo
message, click Continue Anyway
D. Locate a Wireless Network
Amped Wireless
Utility
Once Windows has completed the software
installation, locate the
on your desktop and open the software by
double-clicking the icon. Select the
Networks tab to view nearby networks.
Highlight the network that you wish to connect
to and double-click it to connect or click,
Add to Profile, to have your computer connect
automatically when the network is available.
PCI20E
prompt will appear
Cancel to close
to begin the installation.
Amped Wireless Utility on
Available Networks
Add to
to proceed.
Amped Wireless Utility
Available
tab
v020714