Goji GYCNM13 Quick Start Manual

Wireless Blue Trace Mouse
Quick Start Guide
GYCNM13
Thank you
for purchasing your new Goji Wireless Mouse.
Before commencing the installation and set up, please check that you have all
the items and familiarise yourself with this Quick Start Guide.

UNPACKING

Remove all packaging from the unit. Retain the packaging. If you dispose of it,
please do so according to local regulations.
The following items are included:
2 x AAA Batteries
Quick Start Guide
Mouse Nano Receiver Nano Receiver
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.

SYSTEM REQUIREMENTS

Operating Systems: Microsoft ® Windows ® XP/ Vista™ / 7
& Windows ® 8
Hardware: 1 available USB port

INSTALLING THE BATTERY

1. Turn the keyboard over.
2. Remove the battery compartment cover .
3. Remove the Nano USB Receiver.
4. Insert 2xAAA batteries into the battery compartment.
5. Replace the battery compartment cover.
Please ensure the battery's polarities(+/—) match the battery compartment's polarities.

CONNECTING THE NANO RECEIVER

With your computer switched on, plug the
Nano Receiver directly into your computer's
USB port. It will install a mouse driver.
The Nano Receiver can
be found inside the
battery compartment.
USB

ACTIVATING THE WIRELESS MOUSE

Switch the ON/OFF button to ON. The mouse will automatically activate;
this could take a few seconds.
To save energy, switch the ON/OFF
switchto the OFF position to turn off
the mouse.

PRODUCT OVERVIEW

Left Mouse
Button
Right Mouse
Button
Scroll Wheel
ON/OFF
Switch
Battery
Compartment
Cover