Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Artistic Licence vSplit mono xlr8-8
- Page 1 Artistic Licence versaSplit User Guide versaSplit User Guide Version 1-5...
- Page 2 Please read these instructions before using the product. This product has been designed & manufactured for professional use only. It should only be installed by a suitably qualified technician and in accordance with electrical regulations in the country of use. Unless directed in the instructions there are no user serviceable parts inside the outer case of this product.
-
Page 3: Mounting Diagram
versaSplit mono, versaSplit iso versaSplit mono and versaSplit iso share the same physical configuration, with one input module slot and 10 output connectors. The difference is that the outputs are isolated on versaSplit iso. Connections Ref. Type Description Data connection Input module slot Data connection Output connector... - Page 4 versaSplit duo versaSplit duo has 2 input module slots and 8 output connectors. Connections Ref. Type Description Data connection Input module slot A Data connection Output connector Data connection Input module slot B Fuse Mains I/P fuse Power Connection Mains I/P connection Mounting Diagram versaSplit User Guide Page 4...
-
Page 5: Input Modules
Overview must be disconnected before changing the modules. versaSplit is a modular and configurable rack- The input module choices are as follows: mount product that provides a multi-purpose DMX512/RDM with data fixer, using solution for DMX512, ethernet and radio 5-pin XLR distribution. - Page 6 DMX/RDM input modules Circuit Description Chassis Bonded to Earth-Ground When versaSplit is fitted with one (or two) Type Optically isolated DMX512 DMX/RDM input modules, it acts as a one Pin 1 Isolated input (or two) input splitter / data fixer. Shell The connector shell is module...
-
Page 7: Led Indicators
Split/Fix Mode - Off: no data received Normal splitter operation is achieved by - Green: DMX and RDM received setting the switch next to the input connector to ‘Split’. In splitter mode, the outputs operate - Yellow: DMX only received as bi-directional RDM ports and all DMX data Pow/Fix received is passed onto the outputs. - Page 8 LED indicators LED indicators The CRMX wireless DMX module features The module features 3 LED indicators labelled two sets of LED indicators. Status, Net and DMX. These give different informational signals depending on whether On the left hand side, the strength of the the product is booting up or in operational radio signal is indicated by green lights for mode.
- Page 9 Protocol: Select either Art-Net or sACN Configuration control over this output Configuration is achived via the internal web Merge: Select HTP or LTP merge when server (browse to NetBios ‘VersaEtherB’), or 2 controllers send data to this port via DMX-Workshop (free-of-charge network management software from Artistic Licence: http://tinyurl.com/dmxartpage).
-
Page 10: Application Diagram
Application Diagram Example 1 versaSplit duo with 2 DMX/RDM XLR5 input modules and XLR5 outputs (vSplit duo xlr5-5-xlr5). Here, versaSplit is used simultaneously as a data splitter and fixer. Outputs 1 & 3 are set to input module A, and outputs 6 & 8 are set to input module B. DMX/RDM Terminated vSplit duo xlr5-5-xlr5... -
Page 11: Ordering Information
Ordering information The carrier units are: mono, iso, duo The input modules are: xlr3, xlr5, xlr8, Because so many product configurations are crmx, ethb, b (for blanking plate) and x possible with versaSplit, only a few popular (no module fitted) models are available as stock;... - Page 12 Configuration CRMX wireless DMX module Switch to A/B input module on each Mechanical output (versaSplit duo only) Package Contents As DMX/RDM module Power & Electrical versaSplit mono/iso/duo carrier unit Input voltage: 3.3 V Input module(s) as ordered Control IEC mains lead & rack-ears CRMX wireless DMX Data Connection Input module specification...
-
Page 13: Warranty
Warranty CE Compliance All products are covered from date of purchase by a two-year return to base warranty. versaSplit is CE compliant By return to base, we mean that the customer is responsible for all costs of transport to and from Artistic Licence.
Need help?
Do you have a question about the vSplit mono xlr8-8 and is the answer not in the manual?
Questions and answers