blackloud NETTI Quick Manual

Wisely Connected
Quick Guide
Wisely Connected
Quick Guide

Method One: WPS Setup

1
Plug your NETTI into a power outlet
Plug your NETTI into a power outlet near your Wi-Fi router. If the signal strength
LEDs are flashing (first time setup) or unlit (no signal), proceed with setup.
2
Push the WPS buttons
a) Push your Wi-Fi router's WPS button.
b) Push your NETTI's WPS button.
c) Each of the five Signal Strength LEDs will continue to light sequentially
until the Wi-Fi extension setup is finished. If the WPS setup is
successful, the signal strength LEDs will display full signal strength.
NOTE: If the WPS setup fails, please use Method Two or Method Three.
a) b)

Package Contents

NETTI Wi-Fi Extender

Your NETTI

1. Power LED
2.
Signal Strength LED
3. Ethernet Status LED
c)
Ethernet Cable
1
2
3
4
5
4. Reset Button 6. Ethernet Port
5.
WPS Button
3
Move your NETTI
Plug your NETTI to an outlet where you want to extend your router's Wi-Fi connection.
Your NETTI will connect to your router automatically. If the Signal Strength LED reads at
least 3 bars, you can use your NETTI at this location.
4
Your Wi-Fi connection is extended
Your Wi-Fi signal now covers a wider area than before.
Wisely Connected
Quick Guide
Quick Start Guide

Getting Started

Choose one method to set up
your NETTI:
Method One WPS Setup
6
Method Two Web Browser Setup
Method Three App Setup