Frontier 67026 User Manual

FILTERED WATER BOTTLE
(RED Line Series II)
USER MANUAL
Model Number 67026
FILTERED WATER BOTTLE

INTRODUCTION

Thank you for purchasing the Frontier Flow RED Line Filtered Water Bottle, the perfect
way to enjoy great tasting, pure water with just a squeeze and a sip.
The Frontier Flow is designed for ease of use and reliable service. To ensure proper
performance please follow these simple steps.

FEATURES

• Replaceable Series II, RED Line Filter
• Patented, leak proof Bite-Me™ valve
• Dust Cap keeps valve clean and sanitary
• BPA free, soft, squeezable LDPE bottle
• Finger ring for easy filling and secure attachment to packs or equipment
• Fits in bike bottle cages or cup holders
CAUTIONARY STATEMENTS
• CAUTION - To avoid cross contamination: Do not handle mouthpiece with wet hands
that been exposed to contaminated water. Do not submerge mouthpiece or
unconnected filter in contaminated water.
• CAUTION - Do not freeze filter or expose filter to extreme temperatures

COMPONENTS

3
2
1

PARTS LIST

PART #
014029-036
1
076721-033
2
045294-033
3
050110
4
70074-122
5
EPA Est. No 71766-UT-001
4 5
ITEM NAME
Bottle
RED Line Series II Filter
Barbed Adapter
Straw
Bottle Cap

PRODUCT INSTRUCTIONS

HOW TO FILL AND USE WATER BOTTLE

20
OZ FILL LINE

REMOVE AND REPLACE FILTER

CORRECT

MAINTENANCE AND STORAGE

1. Your Frontier™ Water Bottle can be cleaned with hot, soapy water or by
placing it on the top rack of a dishwasher.
2. Clean the cap by removing the Bite Me™ valve and washing it with hot,
soapy water or by placing the cap with the dust cover open on the top rack of a
dishwasher. Allow to air dry before storing.
3. Clean the Bite Me™ valve by pulling it from the top of the cap and washing it
in the "silverware" tray of a dishwasher. Allow to air dry before replacing in cap and
storing.
4. Replace the Bite Me™ valve by pressing the base of the valve into the top of
the cap with a twisting motion until the flange is fully engaged.
5. The filter can be stored wet and in place for short periods of time (<30 days) due to
the
action of the Miraguard™ Antimicrobial* Technology.
6. If you need to store the filter for long periods of time (>30 days):
a. Remove the filter from the bottle.
b. Remove the straw.
c. Shake out any excess water and allow the filter to dry at least 48 hrs. prior to
storage.
d. Store in a cool, dry place. Do not store in a sealed container.
7. Do not freeze filter. Freezing a wetted filter may damage the filter media and
compromise the filter integrity.
8. Do not expose filter to extreme temperatures.
STEP 1
Unscrew the cap and remove
cap and filter from bottle.
STEP 2
Fill water up to the 20 oz fill
line and screw cap back on.
STEP 3
Open cap and sip through the
Bite Me valve. Squeeze to
TM
accelerate flow.
STEP 1
Unscrew the cap from the water
bottle.
STEP 2
Pull down on filter to disconnect
from seal on cap.
STEP 3
To attach straw, dip straight cut
end of straw 1" deep into hot
water. After 10-15 seconds
remove and push over barb.
Once straw is attached, pinch
the Bite Me valve with one
TM
hand, and push filter upwards
into the cap with the opposite
hand.
STEP 4
Once connected, press down
on the Bite Me valve to align
TM
correctly in cap.
INCORRECT