DW -CP04 Quick Start Manual

DW-CP04 Quick Start Guide
8 9 10
6
DW-CP04 Network Video Encoder
7
1. Mount and connect your analog cameras. Consult the camera's manual for additional
information.
2. Connect the cameras' video output to the Compressor's BNC Input ports.
3. Connect the Compressor to your network using a LAN Cable.
4. When all extrenal devices have been properly connected to the Compressor, connect the power
cable to the back of the encoder.
5. Run the IP Finder software included with the Compressor's accessory CD on a computer located
in THE SAME network as the Compressor.
6. Press the Search button to detect all supported devices located on the network. Allow up to 1
minute for the system to perform the search.
7. If necessary, press the IP Setup tool to properly con gure the Compressor's IP Address and
network information to match your security settings. (Enter admin's pasword, 'root', at the bottom
of the page and press 'Set' to save the changes.)
8. Double-click the Compressor's name or press the 'Home' button to go to the Compressor's Web
Page for additional setup and remote viewing.
NOTE:
Default admin user/ password: root / root
Toll Free: 866.446.3595
www.digital-watchdog.com
11

CONFIGURING THE COMPRESSOR

Image Display
Options
Show/ Hide
Audio Control
Show/ Hide
PTZ Control
Show/ Hide
Channel Control
Fax: 813.888.9262
sales@dwcc.tv
1 2 3 4 5
About
Software
Playback
Instant
Recording
Export Clip
Export Image
PTZ Virtual
Controller
Channel Display
Options
HARDWARE
OVERVIEW
Analog Channel
1 7
Input1~4
2 Audio Input Port 8
3 Audio Output Port 9
Ethernet
4 10
Network Cable
5 Power Supply
11
12VDC, 1A
6 Power LED

USER INTERFACE

OVERVIEW
Live/ Playback/ Admin/ Home views
Main Display Area
Network LED
Sensor Input Ports
1~4
Alarm Output
Port 1~4
Mirco SDHC Slot for
On-Board Storage
Control Port: RS-
485, RS-232, DI, DO