iLive ITB295 Quick Start Manual

Quickstart Guide

Power
Plug the small end of the power cord into the DC Input on the back of the speaker,
and the large plug into a standard wall outlet.
Remote Batteries
Remote control: requires one 2 AAA batteries (included).
iLive | ITB295 v1237-01
Pairing a Bluetooth device for the First time
1. Power on the unit by pressing the Power button.
2. Press the
slowly flashing blue light.
You can also press the Source button on the side of the unit.
3. Press and hold the Pair button on the side of the unit.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the
unit.
4. Use the controls on your Bluetooth device to select ItB295 in your Bluetooth
settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user's manual for your specific device for instructions on pairing and
connecting Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the
Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or
erased due to a reset of the device. If your device should become unpaired or you find
it is unable to connect, repeat the above steps.
Indicator Lights
2x
AAA
button on the remote to switch to Bluetooth Mode, indicated by a
StatuS
Power Off
Optical Mode
Aux In Mode
Line In Mode
Bluetooth Pairing
Bluetooth Connected
IndIcatoR
Red Light
Amber Light
White Light
Green Light
Flashing Blue Light
Blue Light
Customer Support: 1-888-999-4215