qulu Vista i7 Quick Manual

Vista i5/i7 Client Server PC

Quick Guide

I NT RO D U C T I ON
Your Vista i5/i7 PC uses the latest Solid State Drive
(M.2) technology, pre-installed with Windows 10 Pro 64-
bit and other time saving settings and software, to help
you get started with your chosen VMS\Client.
Depending on the model option chosen; your PC may
perform one of the following;
• VistaPC-i5/i7-KL-ClientPC = dedicated VMS viewing
client, no video recording storage.
• Vista-PC-i5/i7-KL-xxTB = VMS Recorder and viewing
client, 6-20TB storage.
Login IDs and passwords are already provided. Modify
or add accounts as required; though you are advised to
retain the Vista account for support reasons.
ID Password
admin Password123
qulu Password54321
Note: qulu user is restricted from making server &
account changes or shutting server down.
S ET UP
Before installing your VMS software, we strongly suggest
you configure a static IP address for the PC. Your
customer's IT Department will be able to provide one.
Network Settings – And Internet Access
1. Boot-up the PC, login as admin (not administrator)
with the password above.
2. Right-click Windows Start button
[Network Connections].
Web: vista-cctv.com
g
Usage
Installer\integrator
End user\customer
, then
Email: info@vista-cctv.com
g
3. Double-click the network card icon - figure 1 example
below
FIGURE 1
4. Click [Properties], set below Internet Protocol TCP/
IPv4 settings and click Save.
IP Address
Subnet mask
Default Gateway
NOTE: "Internet access? IT Department will
confirm if this is to be made available to the server
or not. Internet access makes for easier licensing
of some VMS systems, like qulu, and provides for
remote technical support and updates.
5. Physically install your IP cameras and configure
correct static IP settings for each before installing
the VMS – unless otherwise advised.
I N STALL QUL U
While your Vista PC should be suitable for other VMS
software, we hope you intend to use it with Vista's VMS -
qulu. 30-day 4-channel trial licences are included on the
PC to allow you the qulu experience. Simply follow the
instructions to install it;
1. Login as admin (not administrator).
2. Double-click the short-cut titled "Install qulu"
on the Windows desktop.
3. The following versions of qulu are displayed.
Tel: 0118 912 5000
g
Domain Name Server
Network Time
Server