Replacing The Battery - HTC Fetch User Manual

Replacing the battery

HTC Fetch uses a standard CR2032 coin battery. The battery will last
approximately six months when HTC Fetch is on stand-by. When you
need to replace the battery, you'll receive a notification on your phone.
1. Use a coin to slide the back cover lock to the unlock position, and
then remove the back cover.
2. Remove the battery and insert the new battery.
3. Reinstall the back cover, and then slide the back cover lock to the lock
position.
Tip:
To check the battery power, go to the Settings and tap Bluetooth. Tap
HTC Fetch tag you want to check. The battery power information is just below "Paired
Bluetooth device".
Attaching the keychain
1. Hold the keychain with the clip facing down.
2. Align the keychain with HTC Fetch so that the
HTC logos are facing the same side.
3. Slide the clip over the bar in the lanyard loop.
7
next to the