Subscribe to Our Youtube Channel
Summary of Contents for Dynalab DGRL-01-01
- Page 1 Rockers – DGRL, DGRM, DSRL & DSRM series OPERATING MANUAL DGRL-01-01 DGRM-01-02 Dynalab Corp. November 2017...
- Page 2 BEFORE USE: Please read the following instructions: Warning Check the line supply is sufficient to meet the power requirement of the unit!
- Page 3 Warranty Dynalab Corp. provides a 90 day warranty for the units in this series. This warranty does NOT apply if damage is caused by fire, accident, misuse, neglect, incorrect adjustment or repair, damage caused by incorrect installation, adaptation, modification, fitting of non-approved parts or repair by unauthorized personnel. When...
- Page 4 Overview Rockers – The platform on the mixers move in non-horizontal direction as the motor rotated, i.e. the rocking movement. There are two types of rockers provided: 1, the gyration type and the wave type. With tilted angle in one end, the gyration mixers gyrate in three- dimension.
- Page 5 Figure 4: Overview of the mini scale 3D gyrator rocker (RCK-31). ① Electrical socket; ② Slip-proof platform; ③ LED display on Digital front panel Figure 5: Overview of the lab scale see-saw rocker (RCK-21). ① Electrical socket; ② Slip-proof platform; ③ Digital front panel...
- Page 6 Operation Always install the carrier or platform before turning on the machine. All platforms or carriers are shipped in pre-installed status. For safety reason, please check all the locking screw and tighten again if necessary. The locking screws might be loosened during transportation! Place the machines on the flat and steady surface and keep away from other objects for safe operation.
- Page 7 selection function to either adjust the timer or the speed; the start/stop button is used to start or stop the mixing process. The panel has LED numeric display and red indicators. When starting the mixers, the red indicator between the start/stop and mode buttons illuminate, and when pressing the mode button, the read indicators underneath the rpm and minute alternatively illuminate to show the status of display.
- Page 8 Always unplug the equipment from the electrical outlet. Use soft cloth with mild detergent to clean the surface of the equipment. Dynalab Corp. | 175 Humboldt Street, Suite 300 | Rochester, NY 14610 Tel: 800-334-7585 | Fax: 585-334-0241 www.dynalon.com | E: dynaloninfo@dyna-labware.com...
Need help?
Do you have a question about the DGRL-01-01 and is the answer not in the manual?
Questions and answers