Elecom EC-DC01 Manual

Product number: EC-DC01
ENGLISH

Auto charge control

Connected
devices are
automatically
The high-performance IC (integrated circuit)
recognized for
fastest charging mounted in the USB port recognizes connected
devices and achieves the fastest charge by
optimizing the output power.
5V/2.4A high output
A total combined charging current of
2.4A may be sourced from the two
ports.
Two devices may be charged
simultaneously from the two ports
Since the product has two USB
ports, it is possible to charge two
devices.
Product specifications
Connector speci cations
USB port x 2
Input voltage DC 12V / 24V
Output DC 5V maximum total current 2.4A
Each port maximum 2.4A
Temperature range for use 0°C to 40°C / 32°F to 104°F
(No condensation allowed)
Storage temperature range -20°C to 60°C /-4°F to 140°F
(No condensation allowed)
Main unit size (W x D x H) Approximately 30 x 61 x 30 mm
Approximately 1.18 x 2.40 x 1.18 inches
Maximum Total Output 5V / 2.4A
Attention
Some car models may not be fitted with compatible accessory sockets.
Please check that the internal diameter of the accessory socket is within the
range of φ20.8 mm to φ22 mm / φ0.81 to φ0.86 inches.
Charging function cannot be guaranteed for all devices fitting the connection. Be
sure to confirm your device is compatible prior to use.
We recommend use in conjunction with a commercially available extension
socket or similar when the device cannot be securely fixed because of spatial
restrictions around the accessory socket.
This product is designed for use in cars manufactured for the Japanese market.
This product is a precision instrument. Do not subject it to severe impacts or
handle it roughly as this may cause malfunction.
Be sure to read the instruction manual prior to use, and store it carefully with a
receipt that can be used to confirm the date of purchase.
When this product is in use, noise, or interference, may become audible in music
being played with the car audio system.
The image on the package is for representational purposes only, and may differ
slightly from the actual product.
This product is for negatively earthed vehicles only. Do not use with vehicles
which are positively earthed.
The fuse for this product is not replaceable.
Manual
Maximum Total Output

12V/24V inputs supported

In addition to normal cars, it can be
used with 24V vehicles such as
trucks.
Equipped with power
confirmation LED
When this product is turned on, the
cigar charger LED will light blue.
Car Charger
Auto charge control

[Connection diagram]

Simultaneous charging
of two devices.
This product

Connection to accessory socket

USB port
Devices requiring an output power greater than a single port's rated 5V/2.4A
cannot be used. Furthermore, a combined output of greater than 2.4A for both
ports cannot be sourced. For iPads or tablet computers, make sure that only one
device is connected at any time.
This product has a function to distinguish between Apple products and other
equipment. Therefore, charging is performed using optimum conditions,
regardless of the type of connected equipment or cable. However, when two
ports are used simultaneously, the output may be limited depending on the total
value of output requested.
This product does not include a USB connector cable. Please purchase one
separately.
The USB ports can only connect to Type-A terminals. Also, please be careful
with regard to front-rear orientation when inserting the connector.
The product is dedicated to purposes of power supply / charging, and data can
neither be transmitted nor received.
Depending on the conditions and status at the time of use, the charging speed
may decrease, or power supply / charging may not be possible. If such an
problem occurs when using multiple simultaneous connections, please
disconnect one device at a time and monitor progress while in use.
for iPhone/Android
iPhone iPhone
Smartphone Smartphone
Connects to
your USB cables