Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Becker DP4100
- Page 1 OPERATING INSTRUCTIONS Digital Player DP4100...
- Page 2 Operating Instructions Article-No.: 0530.727-071 © Copyright by Becker Flugfunk Werk GmbH Page 2 of 28 Issue 04/2005...
-
Page 3: Table Of Contents
Becker DP4100 TABLE OF CONTENTS INTRODUCTION..................4 Important ....................4 Safety Information .................4 General Information..................5 Available Versions.................7 Accessories ...................8 OPERATING CONTROLS ...............9 Description and Function of Operating Controls ........9 Operating Instructions ................10 Memory Card Exchange..............10 Power On ....................10 “Music-Card” Operations ..............11 “STOP” Mode.................... 11 “PLAYBACK”... -
Page 4: Introduction
Operating Instructions INTRODUCTION Thank you for purchasing the BECKER Digital Player DP4100. The DP4100 can be installed in the instrument panel of an aircraft and is easy to operate. The used technology is to the state of the art. Important To fully utilize the capabilities of your DP4100, please carefully read these operating instructions, before you start operating the system. -
Page 5: General Information
DOS constraints which means up to 8 chars for the name and up to 3 chars for the file extension. For preparation of cards to be used inside the DP4100 system, a special software tool running on standard personal computers is available. This tool is delivered on a CD-ROM which also contents the system and software manuals. - Page 6 The DP4100 operates with ATA-flashcards only. SRAM cards or other memory card standards will not be accepted. For retrofit reasons, the DP4100 is pin compatible with the TP3100 analog audio tape player provided by BECKER in the past. The DP4100 supports several interfaces for flexible system integration in a wide range of fixed and rotary wing aircraft.
-
Page 7: Available Versions
Becker DP4100 Available Versions DP4100-(001) Article-No.: 0527.343-925 • Control output for external eject indication • Rated output: 0.775V at 600Ω DP4100-(002) Article-No.: 0527.351-925 • Control output for external run indication • Rated output: 0.775V at 600Ω DP4100-(003) Article-No.: 0527.361-925 • Volume control with max. 20dB attenuation •... -
Page 8: Accessories
Accessories The following articles are contained in the scope of delivery: Name of the item Article-No. DP4100 Cardsetup Software 0546.763-909 (CD-ROM incl. manuals in PDF format) The following articles are not contained in the scope of delivery: Name of the item Article-No. -
Page 9: Operating Controls
Becker DP4100 OPERATING CONTROLS Description and Function of Operating Controls Fig. Control Description Function Data Selector Rotary switch Data selection or volume with push button control Menu Button Push button Menu selection On/Off Button Push button System on/off switch PLAY/PAUSE/STOP... -
Page 10: Operating Instructions
Power On The DP4100 can be switched on by pressing the On/Off Button (C) for a short time. By doing this, the initialization process of the system is started. In parallel, the Becker logo is viewable on the display. In the background, a self test routine is processed which checks the internal system functionalities and the presence of a correct memory card. -
Page 11: Music-Card" Operations
Becker DP4100 “Music-Card” Operations “STOP” Mode After the start-up procedure and reading of the card data, the DP4100 switches automatically into the “STOP” mode. This is the normal start or full-back mode of the system. This mode is displayed like following: □... -
Page 12: Pause" Mode
In addition, the range of adjustment can be narrowed. Pressing the PLAY/PAUSE/STOP Button (D) for a time longer than 1 second, stops the playback of the music and the DP4100 goes back into the “STOP” mode. “PAUSE” Mode Pressing the PLAY/PAUSE/STOP Button (D) for a time shorter than 1 second while the DP4100 is in “PLAYBACK”... -
Page 13: Repeat" Mode
Becker DP4100 “REPEAT” Mode The DP4100 provides continuous playback functionality in addition. Simultaneously pressing the buttons SELECT RIGHT (E) and SELECT LEFT (F) while the system is in “STOP” mode, activates this operating mode. This mode is displayed like following: Upper line ►Repeat... -
Page 14: Playlist Preparation
“Pgm Play” in the upper line of the display behind the play/pause/stop identification. Playlist Deletion Pressing the MENU Button (B) while in the DP4100 is in “STOP” mode □ with “ Pgm Play” identification, will delete the prepared playlist. After a short message on the display, the system switch back to the standard “STOP”... - Page 15 Becker DP4100 This side is intentionally blank! Issue 04/2005 Page 15 of 28...
-
Page 16: Announcement-Card" Operations
Operating Instructions “Announcement-Card” Operations “STOP” Mode After the start-up procedure and reading of the card data, the DP4100 switches automatically into the “STOP” mode. This is the normal start or full-back mode of the system. This mode is displayed like following: □... -
Page 17: Language Selection
(activated or deactivated) of the just marked item can be changed by pressing the ENTER Knob (A). NOTE The settings for activated or deactivated languages will not be stored permanently. This means, after restart of the DP4100, all available languages for the missions are activated. Issue 04/2005 Page 17 of 28... -
Page 18: Mission Selection
If prepared on the used memory card, a mission called “MUSIC” can be selected. By selection of this mission, the DP4100 operates similar to a CD-player. In this “mission”, all audio tracks will be played in succession. By pressing the MENU Button (B) once again, the system will switch back into the “STOP”... -
Page 19: Playback" Mode
In addition, the range of adjustment can be narrowed. Pressing the PLAY/PAUSE/STOP Button (D) for a time longer than 1 second, stops the playback of the announcement and the DP4100 goes back into the “STOP” mode. Issue 04/2005... -
Page 20: Pause" Mode
Operating Instructions “PAUSE” Mode Pressing the PLAY/PAUSE/STOP Button (D) for a time shorter than 1 second while the DP4100 is in “PLAYBACK” mode, the playback of the current announcement will be paused. This mode is displayed like following: װ Upper line... -
Page 21: System Properties
Becker DP4100 System Properties The DP4100 provides a possibility for the operator to adjust several parameters which affect the behavior of the system. The adjustments can be done in a special “PROPERTIES” mode that will be activated by pressing the MENU Button (B) for a time longer than 2 seconds. -
Page 22: Property "Volume
“18” means that they will be hearable emphasized. Property “Light” The brightness of the DP4100 front panel display (LCD) can be adjusted in 64 steps. Page 22 of 28... -
Page 23: Property "Keys
(music or announcements). This delay can be adjusted in a range between 200 and 2500msec in steps of 50msec. Property “Audio” Audio output of the DP4100 can be used either in Stereo or in Mono. This can be selected by using the “Audio” property. Property “Sort”... -
Page 24: System Self Test
Operating Instructions System Self Test For safety reasons, the DP4100 provides a build in self test functionality. This test is running continuously in the background when the system is switched on. In the case that an error is detected, this will be shown by an error message on the display. -
Page 25: Technical Data
Becker DP4100 Technical Data Mechanical Data Size HxWxD 56.8 x 145.8 x 170.3mm (without connected cable) Weight ≤0.8kg Card Slot Type PCMCIA PC-Card Type 1 or 2 Electrical Data Power Supply Voltage +27.5V nominal Power Supply Voltage Range +18V … +32.2V Power Consumption approx. -
Page 26: Repair Instructions
Operating Instructions Repair Instructions If a problem occurs which can be assigned to a failure in the DP4100, please send the unit to a BECKER dealer or the BECKER customer service with a failure description. A detailed description of the problem shortens the repair time and hence reduces the resultant costs. -
Page 27: Notes
Becker DP4100 Notes Issue 04/2005 Page 27 of 28... - Page 28 Operating Instructions BECKER FLUGFUNKWERK GMBH Baden Airpark B108 D-77836 Rheinmünster (Germany) Tel.: +49 (0)7229 / 305-0 Fax.: +49 (0)7229 / 305-217 http://www.becker-avionics.com e-mail: info@becker-avionics.de Subject to technical changes! Page 28 of 28 Issue 04/2005...
Need help?
Do you have a question about the DP4100 and is the answer not in the manual?
Questions and answers